MP8765 datasheet(2/21 Pages) MPS

2 / 21 page

MP8765 ─ 24V, HIGH CURRENT SYNCHRONOUS STEP-DOWN CONVERTER

MP8765 Rev. 1.01

www.MonolithicPower.com

2/10/2015

MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.

ORDERING INFORMATION

Part Number*

Package

Top Marking

MP8765GQ

QFN16(3x3mm)

AHR

* For Tape & Reel, add suffix –Z (e.g.MP8765GQ-Z)

PACKAGE REFERENCE

TOP VIEW

PGND

VIN

AGND EN

MODE

VCC

VOUT

BST

ABSOLUTE MAXIMUM RATINGS (1)

Supply Voltage VIN .......................................24V

VSW ............................................. -0.3V to 24.3V

VSW (30ns) ........................................ -3V to 28V

VSW (5ns) .......................................... -6V to 28V

VBST ..................................................VSW + 5.5V

VEN...............................................................12V

Enable Current IEN

(2)................................ 2.5mA

All Other Pins............................. –0.3V to +5.5V

Continuous Power Dissipation (TA=+25°)

(3)

QFN16...……………………….…..…………1.8W

Junction Temperature.............................. 150

°C

Lead Temperature ................................... 260

°C

Storage Temperature............... -65

°C to +150°C

Recommended Operating Conditions

(4)

Supply Voltage VIN ............................. 5V to 22V

Output Voltage VOUT................... 0.604V to 5.5V

Enable Current IEN................................... 1mA

Operating Junction Temp. (TJ). -40°C to +125°C

Thermal Resistance

(5)

θJA

θJC

QFN16 (3mmx3mm) ...............70 ...... 15 ...

°C/W

Notes:

1) Exceeding these ratings may damage the device.

2) Refer to “Configuring the EN Control”.

3) The maximum allowable power dissipation is a function of the

maximum junction temperature TJ(MAX), the junction-to-

ambient thermal resistance θJA, and the ambient temperature

TA. The maximum allowable continuous power dissipation at

any ambient temperature is calculated by PD(MAX)=(TJ(MAX)-

TA)/θJA. Exceeding the maximum allowable power dissipation

will cause excessive die temperature, and the regulator will go

into thermal shutdown. Internal thermal shutdown circuitry

protects the device from permanent damage.

4) The device is not guaranteed to function outside of its

operating conditions.

5) Measured on JESD51-7, 4-layer PCB.

MP8765 데이터시트(PDF) 2 Page - Monolithic Power Systems

MP8765 데이터시트(HTML) 2 Page - Monolithic Power Systems

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21

데이터시트 다운로드

링크 URL