MP2410 – 24V, 2A, 1MHZ, SYNCHRONOUS, STEP-DOWN, LED DRIVER

PRELIMINARY SPECIFICATIONS SUBJECT TO CHANGE

MP2410 Rev. 1.0

www.MonolithicPower.com

13

8/25/2016

MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.

© 2016 MPS. All Rights Reserved.

0

Full Scale

Min Scale

Figure 4: NTC Curve

The NTC resistance value drops when the

ambient temperature rises up. If the NTC voltage

completely, and the LED current drops to 0A, so

the LED lamp can be shut down by pulling NTC

down.

Additionally, to protect against any lethal thermal

damage, when the inner temperature exceeds

the OTP threshold, the MP2410 shuts down the

switching cycle with thermal shutdown until the

temperature drops to its lower threshold.

Thermal Shutdown

Thermal shutdown is implemented to prevent the

chip

from

operating

at

exceedingly

high

temperatures. When the silicon die temperature

is higher than 150°C, OTP shuts down the entire

chip. When the temperature is below its lower

threshold (typically 90°C), the chip restarts.