LTC2947 datasheet(21/30 Pages) LINER

21 / 30 page

dc2334af

DEMO MANUAL DC2334A

By clicking on any register header (e.g. STATUS) or right

clicking on any register value (shown underneath the

header), a context menu with the functions is shown:

1. Change cell’s display format

2. Show cell/register details

3. Write cell/register value to device

4. Read cell/register value from device

5. Select all cells

Figure 40. Display Format Selection

Figure 41. Select All Cells

Figure 42. Change Format of All Selected Cells

Figure 39. Cell/Register Context Menu

Format and Details will be explained in the following sec-

tions. The Write and Read command will immediately

write or read the selected cell value to or from the device.

Select All will select all the cells. It is also possible to

select a range of cells or some individual cells by using

Ctrl or Shift key plus the mouse button. The procedure is

the same as for other Windows programs like MS Excel,

for example. The purpose of selecting more than one cell

is to read and write or change the formats of several cells

at once. See also the following section.

DISPLAY FORMAT SELECTION

Eachcell’sdisplayformatmaybesettoeitherHexadecimal,

Decimal, Binary or Physical. The Physical format (in A,

As, W, V, etc.) is only available for cells having a physical

value representation as the measurement, tracking and

threshold values.

The default cell format is Decimal. All cell values may be

changed at once to the physical format, for example. This

is done by first selecting all cells, either using the shift key

plus mouse button or by using the Select All function from

the context menu. Then right click on any of the selected

cells to open the context menu and set the new format.

The binary and hexadecimal formats are indicated by a

0b and 0x suffix. The physical and decimal format can be

distinguished by the tooltip that is shown after the mouse

has rested for a short while over the cell value. This tooltip

will show the corresponding unit if it is a physical value

or the corresponding LSB value for all the other formats.

DC2334A SOFTWARE USER INTERFACE

LTC2947 데이터시트(PDF) 21 Page - Linear Technology

LTC2947 데이터시트(HTML) 21 Page - Linear Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

데이터시트 다운로드

링크 URL