LT6000 datasheet(11/26 Pages) LINER

11 / 26 page

LTC6261/LTC6262/LTC6263

626123fa

For more information www.linear.com/LTC6261

pin Functions

–IN: Inverting Input of the Amplifier. Voltage range of this

pin can go from V– – 0.1V to V+ + 0.1V.

+IN: Non-Inverting Input of Amplifier. This pin has the

same voltage range as –IN.

V+: Positive Power Supply. Typically the voltage range

spans from 1.8V to 5.25V. Split supplies are possible as

long as the voltage between V+ and V– is between 1.8V

and 5.25V. A bypass capacitor of 0.1µF as close to the part

as possible should be used between power supply pins

in single supply applications or between supply pins and

ground in split supply applications.

V–: Negative Power Supply. It is normally tied to ground.

It can also be tied to a voltage other than ground as long

as the voltage between V+ and V– is from 1.8V to 5.25V.

If it is not connected to ground, bypass it with a capacitor

of 0.1µF as close to the part as possible.

SHDN: Active Low Shutdown. Shutdown threshold is 0.6V

above negative rail. If left unconnected, the amplifier will

be on.

OUT:AmplifierOutput.Rail-to-railamplifieroutputcapable

of delivering greater than ±10mA

siMpliFieD scheMAtic

Figure 1. LTC6261/LTC6262/LTC6263 Simplified Schematic

Q17

Q18

ESDD4

–IN

+IN

V–

Q12

Q16

ESDD3

V+

ESDD1

V+

ESDD2

V–

V+

SHDN

V–

ESDD5

ESDD6

VBIAS

Q19

Q11

Q10

Q13

Q15

OUT

Q14

BUFFER AND

OUTPUT BIAS

626123 F01

LOGIC

LT6000 데이터시트(PDF) 11 Page - Linear Technology

LT6000 데이터시트(HTML) 11 Page - Linear Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26

데이터시트 다운로드

링크 URL