전자부품 데이터시트 검색엔진
  Korean  ▼
ALLDATASHEET.CO.KR

X  

TLE9252V 데이터시트(PDF) 13 Page - Infineon Technologies AG

부품명 TLE9252V
상세설명  High-Speed CAN FD Transceiver
PDF  50 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
제조업체  INFINEON [Infineon Technologies AG]
홈페이지  http://www.infineon.com
Logo INFINEON - Infineon Technologies AG

TLE9252V 데이터시트(HTML) 13 Page - Infineon Technologies AG

Back Button TLE9252V Datasheet HTML 9Page - Infineon Technologies AG TLE9252V Datasheet HTML 10Page - Infineon Technologies AG TLE9252V Datasheet HTML 11Page - Infineon Technologies AG TLE9252V Datasheet HTML 12Page - Infineon Technologies AG TLE9252V Datasheet HTML 13Page - Infineon Technologies AG TLE9252V Datasheet HTML 14Page - Infineon Technologies AG TLE9252V Datasheet HTML 15Page - Infineon Technologies AG TLE9252V Datasheet HTML 16Page - Infineon Technologies AG TLE9252V Datasheet HTML 17Page - Infineon Technologies AG Next Button
Zoom Inzoom in Zoom Outzoom out
 13 / 50 page
background image
Data Sheet
13
Rev. 1.01
2018-01-09
TLE9252V
High-Speed CAN FD Transceiver
Modes of operation
5.2
Receive-only Mode
In Receive-only Mode the transmitter is disabled and the receiver is enabled. The TLE9252V can receive data
from the HS CAN bus, but cannot transmit data to the HS CAN bus.
• The transmitter is disabled and the data available on the TxD input is blocked.
• The receiver is active and converts the signals from the bus to a serial data stream on the RxD output pin.
• The bus biasing is connected to VCC/2.
• The TxD time-out function is disabled.
• The RxD Recessive Clamping detection is disabled.
• The overtemperature protection is disabled.
• The undervoltage detection on VBAT, VCC and VIO is enabled (see Chapter 6.2).
• The INH output pin is connected to VBAT.
• The Local Wake-Up pin is disabled.
• The Power-up flag is signalled at the pin NERR when coming from Standby, Sleep or Go-to Sleep Command
mode.
•The VCC undervoltage detection is active and an undervoltage is indicated at the NERR output pin when
coming from Normal-operating Mode (see Chapter 7).
Conditions for Entering Receive-only Mode:
The TLE9252V enters Receive-only Mode by setting the mode selection pin EN to logical “low” and the NSTB
to logical “high” (see Figure 4 and Table 2). Receive-only Mode can only be entered if VBAT or VCC is in the
functional range and the reference voltage VIO is in the functional range.
Possible mode changes are described in Figure 6.
Figure 6
Mode changes in Receive-only Mode
Sleep Mode
Go-to-Sleep
Command
Stand-by Mode
Normal-
operating Mode
Go-to-Sleep
Command
Stand-by Mode
Normal-
operating Mode
Receive-only
Mode
EN = 0
NSTB = 1
INH = „ON“
EN = 0
NSTB -> 1
EN -> 0
NSTB -> 1
EN -> 1
NSTB -> 0
EN -> 1
NSTB = 1
EN -> 0
NSTB = 1
EN = 0
NSTB -> 1
EN = 0
NSTB -> 0



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50


데이터시트 다운로드

Go To PDF Page


링크 URL



ALLDATASHEET 가 귀하에 도움이 되셨나요?  [ DONATE ] 

Alldatasheet는?   |   광고문의   |   운영자에게 연락하기   |   개인정보취급방침   |   링크 투 데이터시트    |   링크교환   |   제조사별 검색
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com