ISL97652 datasheet(2/25 Pages) RENESAS

2 / 25 page

ISL97652

FN9287 Rev 1.00

Page 2 of 25

November 2, 2007

Absolute Maximum Ratings (TA = +25°C)

Thermal Information

Maximum Pin Voltages, All Pins Except Below . . . . . . . -0.3 to 6.5V

SW, SUP, DRVP, DRVN, SUI, SWO, AVIN, POS1, NEG1, OUT1,

POS2, NEG2, OUT2, VGL . . . . . . . . . . . . . . . . . . -0.3 to 22V

SWI,SW2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3 to 24V

SUI . . . . . . . . . . . . . . . . . . . . . . . V(SWI) - 6.5V to V(SWI) +0.3V

PVIN, SWB, VFLK, VDPM, EN1, EN2, FREQ . . . . . -0.3 to 15.5V

VGH, VGHM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3 to 36V

Recommended Operating Conditions

Input Voltage Range, VIN 8V to 15V

Boost Output Voltage, AVDD up to 19.5V

VON Output Range, VON +15V to +32V

VOFF Output Range, VOFF -15V to -5V

Logic Output Voltage Range, VLOGIC+1.5V to +3.3V

Input Capacitance, CIN2x10µF

Boost Inductor, L1 3.3µH-10µH

Output Capacitance, COUT2x22µF

Buck Inductor, L23.3µH-10µH

Operating Ambient Temperature Range -40°C to +85°C

Operating Junction Temperature Range -40°C to +125°C

Thermal Resistance

JA(°C/W) JC (°C/W)

7x7 QFN Package (Notes 1, 2) . . . . . .

1.5

Maximum Junction Temperature (Plastic Package) . . . . . . . +150°C

Maximum Storage Temperature Range . . . . . . . . . .-65°C to +150°C

Power Dissipation

TA 25°C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3.7W

TA = +70°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2.0W

TA = +85°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.4W

Pb-free reflow profile . . . . . . . . . . . . . . . . . . . . . . . . . .see link below

http://www.intersil.com/pbfree/Pb-FreeReflow.asp

CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product reliability and

result in failures not covered by warranty.

NOTES:

JA is measured in free air with the component mounted on a high effective thermal conductivity test board with “direct attach” features. See

Tech Brief TB379.

2. For

JC, the “case temp” location is the center of the exposed metal pad on the package underside.

Electrical Specifications

VIN = 12V, VBOOST = VSUP = 15V, VON = 25V, VOFF = -8V, over temperature from -40°C to +85°C, unless

otherwise stated.

PARAMETER

DESCRIPTION

CONDITIONS

MIN

TYP

MAX

UNIT

SUPPLY PINS

PVIN

Supply Voltage

812

VSUP

Charge Pumps Positive Supply

VGH

VON-SLICE Positive Supply

AVIN

Op-AmpV Positive Supply

4.5

PIVIN

Quiescent Current into PVIN

Enabled, no switching

Disabled

0.5

µA

ISUP

VSUP Supply Current

Enabled, no switching and

VPOUT =VSUP

0.5

Disabled

µA

IAVIN

AVIN Supply Current

For AVIN range

VREF

Reference Voltage

TA = +25°C

1.252

1.265

1.278

1.240

1.265

1.290

FOSC

Oscillator Frequency for Buck, Boost, VON

and VOFF Functions

FREQ = VIN

1100

1300

1500

kHz

FREQ = GND

550

650

750

kHz

AVDD BOOST

IBOOST

Boost Switch Peak Current

Boost Peak Current limit

2.8

EFFBOOST

Peak Efficiency

See graphs and component

recommendations

rDS(ON)

Switch On Resistance

125

200



ISL97652 데이터시트(PDF) 2 Page - Renesas Technology Corp

ISL97652 데이터시트(HTML) 2 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25

데이터시트 다운로드

링크 URL