APD240 datasheet(4/11 Pages) DIODES

4 / 11 page

APD240

Document number: DS36971 Rev. 4 - 2

4 of 11

www.diodes.com

May 2018

APD240

Maximum Ratings (TA = +25°C, unless otherwise noted.) (Note 4)

Characteristic

Symbol

Rating

Unit

Maximum Repetitive Peak Reverse Voltage

VRRM

Maximum DC Blocking Voltage

VDC

Maximum RMS Voltage

VRMS

Average Rectified Forward Current

0.375 " (9.5mm) Lead Length (See Figure 1)

IF(AV)

2.0

Non-Repetitive Peak Forward Surge Current

8.3ms Single Half Sine-wave on Rated Load

IFSM

Operating Junction Temperature Range (Note 5)

-65 to +125

°C

Storage Temperature Range

TSTG

-65 to +150

°C

Notes:

4. St

resses greater than those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and

functional operation of the device at these or any other conditions beyond those indicated under “Recommended Operating Conditions” is not implied.

Exposure to “Absolute Maximum Ratings” for extended periods may affect device reliability.

5. The heat generated must be less than the thermal conductivity from Junction to Ambient: dPD/dTJ < 1/θJA.

Thermal Characteristics (TA = +25°C, unless otherwise noted.)

Characteristic

Symbol

Rating

Unit

Typical Thermal Resistance

(Note 6)

RθJA

DO-15

°C/W

DO-214AC

SOD-123

200

Note 6:

Device mounted on heat sink, with minimum recommended pad layout per http://www.diodes.com/package-outlines.html.

Electrical Characteristics (TA = +25°C, unless otherwise noted.)

Characteristic

Symbol

Rating

Unit

Test Condition

Forward Voltage @ IF = 2.0A

0.5

—

Reverse Current @ Rated VR (Note 7)

0.5

TA = +25°C

TA = +100°C

Note 7:

Short duration pulse test used to minimize self-heating effect, Pulse Test: 300

μs pulse width, 1.0% duty cycle.

APD240 데이터시트(PDF) 4 Page - Diodes Incorporated

APD240 데이터시트(HTML) 4 Page - Diodes Incorporated

Html Pages

1 2 3 4 5 6 7 8 9 10 11

데이터시트 다운로드

링크 URL