1104LS series

Packaging specifications

This product is baked (moisture removal) before packaging, and is shipped in moisture-proof packaging (as

shown below) to minimize moisture absorption during transportation and storage. However, with regard to

storing the products, Stanley recommends the use of dry-box under the following conditions is

recommended. Moisture-proof bag as the packaging is made of anti-static material but packaging box is not.

The package should not be opened until immediately prior to its use, and please keep the time frame

If the device needs to be soldered twice, both soldering operations must be completed within the

4weeks(672h).

If any components should remain unused, please reseal the package and store them under the conditions

described in the 【 Recommended storage condition 】 above.

This product must be required to perform baking process (moisture removal) for

1.In the case of silica gel (blue) which indicates the moisture level within the package, changes or loses

its blue color.

2. In the case of time passes for 4weeks(672h) after the package is opened once.

Baking process should be performed after LED having been taken out of the package.

Baking may be performed in the tape-reel form , however if it is performed with the reel stacked over

one another, it may cause deformation of the reels and taping materials and later obstruct mounting.

Please handle only once it has returned to room temperature. Provided that, baking process shall be 2

times MAX.

【Time elapsed after package opening】

In the case of the package unopened ,

Please avoid rapid transition from low temp. condition to high temp. condition

and storage in corroding and dusty environment.

【Recommended storage condition / Products warranty period】

Temperature

+5～30℃

Humidity

Under 70%

Page 11

2017.11.20