13

FH33 Series

Actuator

FPC

Precautions

When operating the actuator, do so at the

center portion.

4

As illustrated, do not attempt removal or re-

positioning of the actuator.

5

S

The FPC should be aligned parallel with the board surface and perpendicular with the connector (as

shown), then completely inserted.

To assure correct electrical and mechanical connection do not insert FPC at angle. It must be fully

inserted.

Make sure that the FPC is NOT MOVED during the closing of the actuator.

Perpendicular with

the connector

S

When inserting the FPC, do not forcefully rub against the bottom surface of the connector insertion

entrance. Doing so will result in the contacts and FPC making strong contact and may cause

deformation of the contacts, peeling of the FPC conductor, and other problems.

Peeling of FPC

conductor