AD9736BBC datasheet(68/72 Pages) AD

68 / 72 page

04862-113

NOTES

1. MATERIAL: FOUR LAYER, FR4 GLASS–EPOXY LAMINATE

.062 +/- .007 THICK

1/4 OZ. COPPER CLAD – EXTERNAL LAYERS

PLATED TO 1 OUNCE

2 OZ. COPPER CLAD – INTERNAL LAYERS

2. PLATED THRU HOLES AND THE CONDUCTIVE PATTERN

ELECTROPLATED WITH .001 INCH MIN. THICK COPPER.

TERMINAL AREAS AND EXPOSED PLATED THRU HOLES TO BE

COATED WITH SOLDER AND HOT AIR LEVELED.

3. PROCESSING TOLERANCES:

A. CONDUCTIVE PATTERN FRON TO BACK REGISTRATION

+/– .002 INCH TOTAL

B. MINIMUM ANNULAR RING SURROUNDING HOLES .002 INCH.

C. FINISHED CONDUCTIVE PATTERN +/– .0005 INCH

OF APERTURE SIZE.

4. WARP AND TWIST +/– .005 INCH PER INCH.

5. DIMENTIONS: ARE FOR THE FINISHED PART

6. SOLDER MASK: LIQUID PHOTO IMAGABLE SOLDER MASK

COLOR GREEN, BOTH

SIDES USING THE PATTERN(S) PROVIDED. NO MASK

IS PERMITTED ON THE EXPOSED AREAS. SOLDER

MASK TO ETCH REGISTRATION +/– .002 INCH TOTAL

7. SCREENING: SCREEN COMPONENT OUTLINES AND

NOMENCLATURE USING OPAQUE WHITE INK ON THE

PRIMARY AND SECONDARY SIDES (AS REQUIRED).

NOMENCLATURE SHALL BE LEGIBLE. SCREEN TO ETCH

REGISTRATION +/– .005 INCH TOTAL.

8. SURFACES: PUNCHED OR MACHINED SURFACES 125 MICRO

INCHES RMS MAX.

9. BREAK ALL SHARP EDGES .015 R MAX.

10. FABRICATION VENDOR TO ADD UL VENDOR ID NUMBER

IN THIS AREA ON THE SECONDARY SIDE

11. DO NOT DRILL. FOR GOLD PLATED SOCKETED VERSION ONLY.

AD9736BBC 데이터시트(PDF) 68 Page - Analog Devices