AXL E ETH DI8 DO4 2A M12 6P

8553_en_03

PHOENIX CONTACT

13

10

Local status and diagnostic indicators

10.1

Indicators for Ethernet ports and power supply

Figure 9

Indicators for Ethernet ports and power supply

Designation

Color

Mean-

ing

State

Description

LNK 1/2

Green

Link

Green ON

Connection present at port 1/2.

OFF

Connection not present at port 1/2.

ACT 1/2

Yellow

Activity

Yellow ON

Data transmission present at port 1/2.

OFF

Data transmission not present at port 1/2.

RDY

Green/

yellow/

red

Ready

Green ON

Device is ready for operation.

Green flashing

Firmware update is being performed.

Flashing

green/yellow

Over- or undervoltage at U

S

Temperature of the device is in the critical area.

Failure of the actuator supply U

A

Surge voltage/undervoltage of the actuator supply U

A

And red US LED: sensor supply overload

Red ON

Rotary encoding switches are set to an invalid/reserved position.

OFF

Device is not ready for operation.

NET

Green/

yellow/

red

Net-

work

status

Green flashing

A connection can be established to the device.

Green ON

At least one connection has been established to the device.

Yellow flashing BootP request or DHCP requests/discover messages are being trans-

mitted.

Yellow ON

The IP configuration/IP address (0.0.0.0) is invalid.

Red flashing

An IP address conflict has occurred during static configuration via rotary

coding switches (IP address assigned twice).

Red ON

A network error has occurred. The monitoring function detected an error

or the process data watchdog was activated.

OFF

Device is not ready for operation.

US

Green/

red

U

Sensorik

Green ON

Communications power/sensor voltage present

OFF

Communications power/sensor voltage not present or too low.

Red ON

Sensor voltage overload

UA

Green

U

Aktorik

ON

Actuator voltage present.

OFF

Actuator voltage not present.