DS101356-18

Internal Pixel Count final value = pixels per line/2

Maximum Internal Pixel Count = 1024 (32.5 MHz clocks)

Internal Pixel Count is used to generate the horizontal_component for GPO generation

See

Figure 11

**Without Blanking control (GPO8), random data may be observed 16 OCLK before E/OSP. During this period it is also possible that 1 discontinuous (

incomplete) OCLK may also be observed. However this occurence should not adversely affect the actual image since it occurs before E/OSP.

FIGURE 9. Internal Pixel Count Used for GPO Control Generation

DS101356-19

LC = lines per frame count, LCmax = 2048 lines

Internal Line Count is used to generate the vertical component for GPO generation

See

Figure 11

FIGURE 10. Internal Line Count Used for GPO Control Generation

www.national.com

6