| 전자부품 데이터시트 검색엔진 |
|
MC14511L-S16-R 데이터시트(PDF) 4 Page - Unisonic Technologies |
|
|
|||||||||||||||||||||||||||||
MC14511L-S16-R 데이터시트(HTML) 4 Page - Unisonic Technologies |
|
4 / 8 page ![]() MC14511 CMOS IC UNISONICTECHNOLOGIESCO.,LTD 4 of 8 www.unisonic.com.tw QW-R502-021.C ABSOLUTE MAXIMUM RATINGS (Note 3) PARAMETER SYMBOL RATINGS UNIT DC Supply Voltage Range VDD -0.5 ~ +18.0 V Input Voltage Range, All Inputs VIN -0.5 ~ VDD+0.5 V DC Current Drain per Input Pin I 10 mA Power Dissipation, per Package PD 500 mW Maximum Output Drive Current (Source) per Output IOHMAX 25 mA Maximum Continuous Output Power (Source) per Output (Note 2) POHMAX 50 mA Operating Temperature Range TA -55 ~ +125 C Storage Temperature Range TSTG -65 ~ +150 C Notes: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. 2. POHMAX = IOH (VDD – VOH) 3.This device contains protection circuitry to protect the inputs against damage due to high static voltages or electric fields. However, it is advised that normal precautions be taken to avoid application of any voltage higher than maximum rated voltages to this high-impedance circuit. A destructive high current mode may occur if VIN and VOUT are not constrained to the range: VSS ≤ (VIN or VOUT) ≤ VDD Due to the sourcing capability of this circuit, damage can occur to the device if VDD is applied, and the outputs are shorted to VSS and are at a logical 1 (See Maximum Ratings). Unused inputs must always be tied to an appropriate logic voltage level (e.g., either VSS or VDD). ELECTRICAL CHARACTERISTICS (TA=25°C, unless otherwise specified) PARAMETER SYMBOL VDD VDC TEST CONDITIONS MIN TYP (Note 1) MAX UNIT “0” Level VOL 5.0 10 15 VIN=VDD or 0 0 0 0 0.05 0.05 0.05 V Output Voltage “1” Level VOH 5.0 10 15 VIN=0 or VDD 4.1 9.1 14.1 4.57 9.58 14.59 V “0” Level VIL 5.0 10 15 VO=3.8 or 0.5 V VO=8.8 or 1.0 V VO=13.8 or 1.5V 2.25 4.50 6.75 1.5 3.0 4.0 V Input Voltage (Note 1) “1” Level VIH 5.0 10 15 VO=0.5 or 3.8 V VO=1.0 or 8.8 V VO=1.5 or 13.8 V 3.5 7.0 11 2.75 5.50 8.25 V 5.0 IOH=0mA IOH=5.0mA IOH=10mA IOH=15mA IOH=20mA IOH=25mA 4.1 3.9 3.4 4.57 4.24 4.12 3.94 3.70 3.54 V Output Drive Voltage (Source) VOH 10 IOH=0mA IOH=5.0mA IOH=10mA IOH=15mA IOH=20mA IOH=25mA 9.1 9.0 8.6 9.58 9.26 9.17 9.04 8.90 8.70 V |
|
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |