TP01(02)AZ Series

www.gztoppower.com

TEL:0086-20-82019000

Email:sales2@gztoppower.com

Page2 / 3

SAFETY AND ELECTROMAGNETIC COMPATIBILITY

Safety standard

EN60950,EN60601,UL60950

Isolated Voltage

I/P-O/P:3000VAC

Isolated resistance

I/P-O/P>100M Ohms/500VDC 25℃ 70% RH

Conduction and radiation

EN55011, EN55022 (CISPR22)

CLASS B

Electrostatic discharge ( ESD)

IEC/EN 61000-4-2 level 4

8kV/15kV

Radiofrequency radiation immunity(RF)

IEC/EN 61000-4-3

Electrical fast transient(EFT)

IEC/EN 61000-4-4 level 4

4kV

Surge

IEC/EN 61000-4-5 level 4

2kV

OTHER CHARACTERISTICS

MTBF

200K hrs min.

MIL-HDBK-217F(25)

Dimension

32*20*15mm

NOTES

1.The above data except for special instructions, are measured at TA = 25oC, humidity <75%, input nominal voltage 230Vac and output rated load

2.Ripple & noise are measured in accordance with the link of the application circuit in this manual, using a 300mm twisted pair-wire and 20MHZ bandwidth

3.The power supply is considered a component which will be installed into a final equipment.

The final equipment must be re-confirmed that it still meets EMC directives

TYPICAL APPLICATION CIRCUIT

Notes

：

1.The output filter capacitor C5 is electrolytic capacitor, recommend using of high frequency and low resistance of electrolytic capacitors, the capacity and the current

flowing-through need refer to the technical specifications provided by the manufacturer. C4 is use to remove high frequency noise.

2.EMC filter used in the dashed box is to meet the higher requirements

，if it is used in general applications，it can be omitted.

TOPPOWER