| 전자부품 데이터시트 검색엔진 |
|
AW9233CSR 데이터시트(PDF) 22 Page - Shanghai awinic technology co.,ltd |
|
|
|||||||||||||||||||||||||||||
AW9233CSR 데이터시트(HTML) 22 Page - Shanghai awinic technology co.,ltd |
|
22 / 48 page ![]() AW9233 June 2018 V1.2 www.awinic.com.cn 22 Copyright © 2016 SHANGHAI AWINIC TECHNOLOGY CO., LTD When SRAM program running, if Ch field or value of Rx in LED control command is ‘11111’, the current command is active for all LED with setting of CTRSR.bitn=0. If Ch field or value of Rx in LED control command is ‘11110’, the current command is only active for those channel with setting of GMSKx=0. When LED instruction is come from I2C interface directly, it is recommended to use only the command with immediate data. If the Ch field in command is “11111”, the current command is only active for those LED with STRSR.bitn=1.. Table 5 LED Control Instruction explanation Instruction Description Register Parameter SETPWMR Rx Ry Set the PWM brightness level with parameter in register Rx: LED channel number, 2,4,6 for LED 1~ LED 3 respectively Ry: Brightness level, 0~255 RAMPR Dir Rx Ry Set the Fade-in/Fade-out for specified step with parameter in register Dir: 1: Fade-in; 0: Fade-out Rx: LED channel number, 2,4,6 for LED 1~ LED 3 respectively Ry: the step number of Fade-in/Fade-out SETSTEPTMRR Pre Rx Ry Set the RAMP slope with parameter in register Pre: basic time unit, 0: 0.5ms; 1: 16ms Rx: LED channel number, 2,4,6 for LED 1~ LED 3 respectively Ry: RAMP step time = (Ry+1)*Pre, 0~255 Immediate Data SETPWMI Ch Im Set the PWM brightness level with immediate parameter Ch: LED channel number, 2,4,6 for LED 1~ LED 3 respectively Im: Brightness level, 0~255 RAMPI Dir Ch Im Set the Fade-in/Fade-out for specified steps with immediate parameter Dir: 1: Fade-in; 0: Fade-out Ch: LED channel number, 2,4,6 for LED 1~ LED 3 respectively Im: the steps of Fade-in/Fade-out SETSTEPTMRI Pre Ch Im Set the RAMP step time with immediate parameter Pre: basic unit of time, 0: 0.5ms; 1: 16ms Ch: LED channel number, 2,4,6 for LED 1~ LED 3respectively Im: RAMP step time = (Im +1)*Pre, 0~255 |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |