GD5F1GQ4REFJS datasheet(24/60 Pages) GIGADEVICE

24 / 60 page

SPI(x1/x2/x4) NAND Flash

9.2 Read UID

The Read Unique ID function is used to retrieve the 16 byte unique ID (UID) for the device. The unique ID when combined

with the device manufacturer shall be unique.

The UID data may be stored within the Flash array. To allow the host to determine if the UID is without bit errors, the UID is

returned with its complement. If the XOR of the UID and its bit-wise complement is all ones, then the UID is valid. To

accommodate robust retrieval of the UID in the case of bit errors, sixteen copies of the UID and the corresponding

complement shall be stored by the target. For example, reading bytes 32-63 returns to the host another copy of the UID

and its complement.

Bytes

Value

0-15

UID

16-31

UID complement (bit-wise)

The Read UID command sequence is as follows:

Use EDh+00h read UID from array to cache.

Use 0FH (GET FEATURES command ) read the status

User can use Read from cache command (03H/0BH/3BH/6BH/BBH/EBH), read UID from cache.

Read UID to Cache (EDH+00H) + Get Feature (0FH)

Figure9-2. Read UID to cache and Get Feature command Sequence Diagram

Command

EDH

CS#

SCLK

High-Z

9 10

Command

CS#

Get Feature

0FH

CS#

SLK

High-Z

9 10 11 12 13 14 15

MSB

1 byte address

Data byte

MSB

SCLK

tCS

16 17 18 19 20 21 22 23 24

00H

12 13

GD5F1GQ4REFJS 데이터시트(PDF) 24 Page - GigaDevice Semiconductor (Beijing) Inc.

GD5F1GQ4REFJS 데이터시트(HTML) 24 Page - GigaDevice Semiconductor (Beijing) Inc.

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

데이터시트 다운로드

링크 URL