This document contains data proprietary to PUI Audio Inc. Any use or reproduction, in any form, without prior written permission

of PUI Audio Inc. is prohibited.

©2019, PUI Audio Inc.

PUI Audio, Inc., 3541 Stop Eight Road, Dayton, OH 45414

Tel: (937) 415-5901 Fax: (937) 415-5925

Reliability Testing

Type of Test

Test Specifications

High Temperature Test

200 hours at +60°C ± 3°C followed by two hours

in normal room temperature

Low Temperature Test

200 hours at -20°C ± 3°C followed by two hours

in normal room temperature

Humidity Test

200 hours at +40°C ± 3°C with relative humidity

at 90% to 95% followed by 2 hours in normal

room temperature

Temperature Cycle Testing

30 minutes at -25°C, 10 minutes at 20°C, 30

minutes at +70°C, 10 minutes at 20°C for five

cycles, followed by 2 hours in normal room

temperature

Vibration Test

10 to 55 Hz for 1 minute with 1.52mm distance,

followed by a two-hour 3 axis test in packaging

Drop Test

Drop microphones in packaging onto concrete

floor from 1-meter height in each of 3-axis

ESD Test (according to IEC 6100)

1. Contact discharge - Discharge 6000 VDC

from capacitor into microphone output

through 330Ω resistor ten times.

2. Air discharge - Discharge 8000 VDC into

sound hole of the microphone ten times.

After each test, the speaker’s SPL shall be ±3 dB of the original SPL

Dimensions

Recommended Drive Circuit