 |
전자부품 데이터시트 검색엔진 |
|
|
전자부품 데이터시트 검색엔진 |
|
AN4989 데이터시트(PDF) 38 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
AN4989 데이터시트(HTML) 38 Page - STMicroelectronics |
|
|
38 / 99 page  Connecting to the board AN4989 38/99 DocID030181 Rev 2 Figure 25. Select Generator Options Reset Mode in SW4STM32 V2.0.0 The Mode Setup group allows to set up the Reset Mode along with other debug behaviors. • Reset Mode as Connect under reset: asserts hardware reset and then connects to the target (under reset). • Reset Mode as Hardware reset: performs a hardware reset and then connects to the target. • Reset Mode as Software system reset: does not perform any hardware reset but connects to the target and performs a software system reset. In case of problem to connect to the board with SW4STM32, make sure that NRST from ST-LINK is properly connected to STM32 NRST. Hotplug mode is not proposed by SW4STM32. ST-LINK utility can be used instead. |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Korean ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
