전자부품 데이터시트 검색엔진
  Korean  ▼
ALLDATASHEET.CO.KR

X  

SMB18AFAM10 데이터시트(PDF) 5 Page - Banner Engineering Corp.

부품명 SMB18AFAM10
상세설명  MINI-BEAM SME312 Expert Series
PDF  13 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
제조업체  BANNER [Banner Engineering Corp.]
홈페이지  https://www.bannerengineering.com/us/en.html
Logo BANNER - Banner Engineering Corp.

SMB18AFAM10 데이터시트(HTML) 5 Page - Banner Engineering Corp.

  SMB18AFAM10 Datasheet HTML 1Page - Banner Engineering Corp. SMB18AFAM10 Datasheet HTML 2Page - Banner Engineering Corp. SMB18AFAM10 Datasheet HTML 3Page - Banner Engineering Corp. SMB18AFAM10 Datasheet HTML 4Page - Banner Engineering Corp. SMB18AFAM10 Datasheet HTML 5Page - Banner Engineering Corp. SMB18AFAM10 Datasheet HTML 6Page - Banner Engineering Corp. SMB18AFAM10 Datasheet HTML 7Page - Banner Engineering Corp. SMB18AFAM10 Datasheet HTML 8Page - Banner Engineering Corp. SMB18AFAM10 Datasheet HTML 9Page - Banner Engineering Corp. Next Button
Zoom Inzoom in Zoom Outzoom out
 5 / 13 page
background image
2. Teach the first sensing condition.
Method
Action
Result
Via push button
Present the first sensing condition and click the push
button.
The amber LED is off. The red LED pulses to indicate
relative signal strength. The sensor registers the
output ON condition and is ready for the output OFF
condition.
Via remote line
Present the first sensing condition and single-pulse the
remote line.
3. Teach the second sensing condition and return to RUN mode.
Method
Action
Result
Via push
button
Present the second sensing condition
and click the push button.
If the teach is accepted the green LED is on (or flashes if the signal is
close to the switching threshold) and the amber LED is off until the
sensing condition changes; the sensor registers the output OFF
condition, positions the threshold, and returns to RUN mode.
If the teach is not accepted, the amber LED is on and the red LED pulses
to indicate the relative received signal strength. The sensor returns to its
wait state and is ready for the first sensing condition.
Via remote line Present the second sensing condition
and single-pulse the remote line.
NOTE: The sensor returns to RUN mode if the first TEACH condition is not registered within 90 seconds. TEACH mode may be
cancelled before either the first or second condition by holding the push button depressed for more than two seconds.
Enabling or Disabling the Push Button
In addition to its programming function, the remote line may be used to disable the push buttons for security. Disabling
the push buttons prevents undesired tampering with the sensor configuration settings.
1. Connect the sensor’s gray wire.
2. Four-pulse the remote line to enable or disable the push button.
The sensor toggles between enable and disable settings and returns to RUN mode.
MINI-BEAM SME312 Expert Series
P/N 55214 Rev. G
www.bannerengineering.com - Tel: +1-763-544-3164
5



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13


데이터시트 다운로드

Go To PDF Page


링크 URL



ALLDATASHEET 가 귀하에 도움이 되셨나요?  [ DONATE ] 

Alldatasheet는?   |   광고문의   |   운영자에게 연락하기   |   개인정보취급방침   |   링크 투 데이터시트    |   링크교환   |   제조사별 검색
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com