Description

DIP Switches

1

2

3

4

5

6

7

8

Reserved

ON

ON

OFF

User configured (use the Sensor Configuration Tool To pre-configure

QM42VT1)

ON

ON

ON

Sample/report rate: user configured (5 minutes by default)

OFF*

OFF*

Sample/report rate: 150 seconds

OFF

ON

Sample/report rate: 60 seconds

ON

OFF

Reserved

ON

ON

English units (e.g. velocity = in/s)

OFF*

Metric units (e.g. velocity = mm/s)

ON

Reserved

OFF*

* Default position

I/O Configurations (Set by DIP Switches 2, 3, and 4)

Input

Register

Default I/O

I/O Configuration 1

I/O Configuration 2

I/O Configuration 3

I/O Configuration 4

I/O Configuration 5

1

Z-Axis

RMS Velocity (in/sec) RMS Velocity (in/sec)

High-Frequency RMS

Acceleration (G)

RMS Velocity (in/

sec)

Full Bandwidth RMS

Acceleration (G)

RMS Velocity (in/sec)

2

High-Frequency RMS

Acceleration (G)

Peak Acceleration (G)

Peak Acceleration (G)

Peak Velocity

Component

Frequency (Hz)

Full Bandwidth Peak

Acceleration (G)

Full Bandwidth RMS

Acceleration (G)

3

-

Temperature (°F)

Temperature (°F)

Temperature (°F)

Temperature (°F)

Temperature (°F)

Temperature (°F)

4

-

Reserved

Reserved

Reserved

Reserved

Reserved

Reserved

5

X-Axis

RMS Velocity (in/sec) RMS Velocity (in/sec)

High-Frequency RMS

Acceleration (G)

RMS Velocity (in/

sec)

Full Bandwidth RMS

Acceleration (G)

RMS Velocity (in/sec)

6

High-Frequency RMS

Acceleration (G)

Peak Acceleration (G)

Peak Acceleration (G)

Peak Velocity

Component

Frequency (Hz)

Full Bandwidth Peak

Acceleration (G)

Full Bandwidth RMS

Acceleration (G)

If DIP switch 7 is on, all in/s units change to mm/s. DIP switch 7 will only switch units with DIP switch I/O configurations, not with

any user configuration.

Configure the Q45 Using the User Configuration Tool (UCT)

The User Configuration Tool (UCT) offers an easy way to change sensor settings, show sensor data from different sensors, and

retrieve data from the Gateway radio. The UCT runs on any Windows computer and uses an adapter cable to connect the Gateway

to your computer.

Download the most recent version of the UCT from Banner Engineering's website:

www.bannerengineering.com/wireless.

4

www.bannerengineering.com - Tel: +1-763-544-3164

P/N 208637 Rev. A