®

LED..A80X80QPMA Series Area Lights

Printed in USA

11/04

P/N 119700

Features

• Lightly diffused area light for PresencePLUS® sensors. See Banner’s website at

www.bannerengineering.com for a complete lighting tutorial.

• Continuous or strobed operation

• Solid-state LED light source

• Two available bracket options

Light Source

LED; see Models table above for wave lengths

Illumination

Lightly diffused, high-intensity area light

Infrared model: At a 24" distance, illuminates an 8" diameter area within 60% of the center intensity.

Visible LED models: At a 12" distance, illuminates a 4" diameter area within 50% of the center intensity.

Supply Voltage and Current

24V dc @ 250 mA max.

Connections

150 mm (6") attached PVC pigtail with 3-wire M12 x 1 male QPMA connector

Construction

Low-carbon steel with black zinc plating, acrylic window

Useful Life

10,000 hours (LED ON time). When operated within specifications, output will decrease less than 30%

after 10,000 hours and less than 40% after 20,000 hours.

Operating Conditions

Temperature: 0° to +50°C (+32° to 122°F)

Relative humidity: 90% at 50°C (non-condensing) max.

Cleaning Instructions

Regularly remove any dust, dirt, or fingerprints from the light source.

1. Blow off dust using anti-static compressed air.

2. If necessary, use a lens cloth and lens cleaner or window cleaner to wipe off remaining debris. Do not use

any other chemicals for cleaning.

Specifications

Models

LED Color

Wave Length

LEDIA80X80QPMA

Infrared

850 nm

LEDRA80X80QPMA

Visible Red

660 nm

LEDWA80X80QPMA

White

All Visible

LEDBA80X80QPMA

Blue

470 nm

LEDGA80X80QPMA

Green

525 nm

Models

Pin-Out

����������

�������

����������

�����������

����������

�������