UM1718 datasheet(38/231 Pages) STMICROELECTRONICS

38 / 231 page

STM32CubeMX User Interface

UM1718

38/231

DocID025776 Rev 15

STM32CubeMX User Interface

STM32CubeMX user interface consists of a main window, a menu bar, a toolbar, four views

(Pinout, Configuration, Clock Configuration, Power Consumption Calculator) and a set of

help windows (MCUs selection, Update manager, About). All these menus are described in

the following sections.

For C code generation, although the user can switch back and forth between the different

configuration views, it is recommended to follow the sequence below:

Select the relevant IPs and their operating modes from the Pinout view.

Configure the clock tree from the clock configuration view.

In the Pinout view, configure the RCC peripheral by enabling the external clocks,

master output clocks, audio input clocks (when relevant for your application). This

automatically displays more options on the Clock tree view (see Figure 23).

Configure the parameters required to initialize the IP operating modes from the

configuration view.

Generate the initialization C code.

4.1

Welcome page

The Welcome page is the first window that opens up when launching STM32CubeMX

program. It remains open as long as the application is running. Closing it closes down the

application. Refer to Figure 20 and to Table 2 for a description of the Welcome page.

Figure 20. STM32CubeMX Welcome page

UM1718 데이터시트(PDF) 38 Page - STMicroelectronics