Computer Marking System

Engraving System CMS-GRAV

Description

The CMS-GRAV 32 is based on a three-axis coordinate

table with stepping motors and a ball screw free from

play. The multiprocessor-based control drives the three

axes and the tool changer.

The transparent safety cover allows optimum viewing of

the work area from all sides. This is one of the most

important elements of the comprehensive safety

features.

The CMS-GRAV 32 has a processing area (x,y,z) of

500 x 500 x 75 mm and a maximum clamping range

(x,y,z) of 850 x 750 x 150 mm.

The FF (fast frequency) spindle used has a capacity of

170 W and a max. torque of 60,000 rev/min. The special

clamping pliers of the spindle are designed for

processing tools with a shaft diameter of 3 mm.

A special tracing sleeve with the highly precise, spring-

loaded spindle block permits mechanical surface

scanning when slightly uneven workpieces are

engraved. This ensures a constant engraving depth. The

spring is automatically clamped during boring and

milling work.

During metalworking, the tools are cooled with the

coolant spraying device. Any chips that arise during the

processing of plastics are removed with the suction

device. This can be connected to a commercially

available industrial vacuum cleaner.

The tool magazine with its 10 tool holders makes the

CMS-GRAV 32 a fully automatic processing center

which can be used to produce even complicated

workpieces economically.

The precision end switch integrated in the tool magazine

permits the tool change to be monitored and the length

compensation data of the processing tools to be

transferred.

When surface scanning is used, the depth of the

engraving chisels is set with the adjusting device

included in delivery.

The scope of supply includes the serial connection

cable.

Phoenix Contact GmbH & Co. KG • 32823 Blomberg, Germany

Phone +49 52 35 3-00 • Fax +49 52 35 3-4 12 00 • www.phoenixcontact.com