SL2S2602 datasheet(2/55 Pages) NXP

2 / 55 page

NXP Semiconductors

SL2S2602

ICODE SLIX2

SL2S2602

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 4.1 — 25 July 2017

COMPANY PUBLIC

276341

2 / 55

The 32-bit Destroy password enables an addressed label to be destroyed with the

DESTROY SLIX2 command. That status is irreversible and the label will never respond

to any command again.

• Password protected Privacy Mode:

The 32-bit Privacy password enables a label to be set to the Privacy mode with the

ENABLE PRIVACY command. In this mode the label will not respond to any command

except the command GET RANDOM NUMBER, until it next receives the correct

Privacy password. This mode is especially designed to meet the increasing demand to

take care of the customers privacy.

• Password protected EAS and AFI functionality:

The 32-bit EAS/AFI password enables the addressed label to be set in a mode

where the EAS status, the EAS ID and/or the AFI value can only be changed if the

correct EAS/AFI password needs to be transmitted before with the SET PASSWORD

command.

• 16 bit counter:

The last block of the user memory provides a special feature - the 16 bit counter.

The counter can be increased by one with a WRITE command (optionally password

protected by the read password). The counter can be reset to an initial value with the

write password.

SL2S2602 데이터시트(PDF) 2 Page - NXP Semiconductors