TMP6331DECT datasheet(16/28 Pages) TI1

16 / 28 page

Temperature (qC)

-60

-40

-20

100

120

140

TMP6

IBias = 5 PA

IBias = 10 PA

IBias = 20 PA

IBias = 30 PA

IBias = 40 PA

TMP63

SNIS211C – OCTOBER 2019 – REVISED JUNE 2020

www.ti.com

Product Folder Links: TMP63

Submit Documentation Feedback

Typical Application (continued)

9.2.2 Application Curve

Figure 21. Temperature vs. Voltage at Varying Current Source Values

10 Power Supply Recommendations

The maximum recommended operating voltage of the TMP63 is 5.5 V (VSNS), and the maximum current through

the device is 40 µA (ISNS).

11 Layout

11.1 Layout Guidelines

The layout of the TMP63 is similar to that of a passive component. If the device is biased with a current source,

the positive pin 2 is connected to the source, while the negative pin 1 is connected to ground. If the circuit is

biased with a voltage source, and the device is placed on the lower side of the resistor divider, V– is connected

to ground, and V+ is connected to the output (VTEMP). If the device is placed on the upper side of the divider, V+

is connected to the voltage source and V– is connected to the output voltage (VTEMP). Figure 22 shows the

device layout.

11.2 Layout Example

Figure 22. DEC Package Recommended Layout

TMP6331DECT 데이터시트(PDF) 16 Page - Texas Instruments