PI74LVC4245AL datasheet(2/9 Pages) PERICOM

2 / 9 page

PI74LVC4245A

8-Bit Dual Supply Bus Transceiver

with 3-State Outputs

P-0.2

08/11/03

ADVANCE INFORMATION

Maximum Ratings

(Above which the useful life may be impaired. For user guidelines, not tested.)

Supply voltage range, VCCA and VCCB ............................ –0.5V to +7V

Input voltage range, VI(2) : I/O ports (A-port) ....–0.5V to VCCA +0.5V

I/O ports (B-port) ...........–0.5V to VCCB+0.5V

Control Pins .................–0.5V to VCCA +0.5V

Input clamp current, IIK (VI <0)................................................–50mA

Output clamp current, IOK (VO <0)...........................................–50mA

Continous Output Current IO ..................................................±50mA

Continous Current through each VCC or GND pin .......................±100mA

Package thermal impedance, θJA(3): package L...................... 84°C/W

package Q...................... 98°C/W

package S ...................... 79°C/W

Storage Temperature range, Tstg ................................–65°C to 150°C

2. This value is limited to 7V maximum.

3. The package thermal impedance is calculated in accordance with JESD

51.

Notes:

Stresses greater than those listed under MAXIMUM RATINGS may cause

permanent damage to the device. This is a stress rating only and func-

tional operation of the device at these or any other conditions above those

indicated in the operational sections of this specification is not implied.

Exposure to absolute maximum rating conditions for extended periods

may affect reliability.

Recommended Operating Conditions for VCCA = 4.5V to 5.5V(4)

Notes: 4. All unused inputs of the device must be held at the associated VCC or GND to ensure proper device operation.

Recommended Operating Conditions for VCCB = 2.7V to 3.6V(4)

Notes: 4. All unused inputs of the device must be held at the associated VCC or GND to ensure proper device operation.

Parameter

Description

Min.

Max.

Units

VCCA

Supply Voltage

4.5

5.5

VIH

High-Level Input Voltage

VIL

Low-Level Input Voltage

0.8

Input Voltage

VCCA

Output Voltage

VCCA

IOH

High-Level Output Current

–24

IOL

Low-Level Output Current

Operating Free-Air Temperature

–40

°C

Parameter

Description

Min.

Max.

Units

VCCB

Supply Voltage

2.7

3.6

VIH

High-Level Input Voltage

VCCB = 2.7V to 3.6V

VIL

Low-Level Input Voltage

VCCB = 2.7V to 3.6V

0.8

Input Voltage

VCCB

Output Voltage

VCCB

IOH

High-Level Output Current

VCCB = 2.7V

–12

VCCB = 3V

–24

IOL

Low-Level Output Current

VCCB = 2.7V

VCCB = 3V

Operating Free-Air Temperature

–40

°C

PI74LVC4245AL 데이터시트(PDF) 2 Page - Pericom Semiconductor Corporation

PI74LVC4245AL 데이터시트(HTML) 2 Page - Pericom Semiconductor Corporation

Html Pages

1 2 3 4 5 6 7 8 9

데이터시트 다운로드

링크 URL