TP10DA SERIES

www.gztoppower.com

TEL:0086-20-62162688

Email:sales2@gztoppower.com

page3 /3

STEMPERATURE DERATING GR

RECOMMEND APPLICATION CIRCUIT:

SELECTION Reference

Input

External

capacitor C1

Dual

output

External

capacitor C2

24VDC

47uF

±12VDC

100uF

USING ATTENTIONS

Try to avoid no-load use: when the load power consumption is less than 5% of the rated output power of the module, it is recommended to connect a dummy

load to the output terminal or choose a module with a lower rated power. The dummy load (resistance) can be 5-10% of the rated power of the module, resistance

value=U2/(5%*10W)

The output external capacitor should not be too large:The output capacitor should not be too large, otherwise it will easily cause overcurrent or poor startup

when the module starts. The specific selection should be based on the external capacitor table.

TOPPOWER