Silicom Ltd. Connectivity Solutions

Page

2



802.x flow control

Bypass:



Bypass / Disconnect Ethernet ports on Power Fail, System Hangs or Software Application Hangs



Software programmable Bypass, Disconnect or Normal Mode



On Board Watch Dog Timer (WDT) Controller



Software programmable time out interval



Software Programmable WDT Enable / Disable counter



Software programmable Bypass Capability Enable / Disable



Software Programmable Disconnect Capability Enable / Disable



Software Programmable mode (Bypass, Normal or Disconnect mode) at Power up



Software Programmable mode (Bypass, Normal mode) at Power off

Copper Gigabit Ethernet 1000Base-T :



Independently copper Gigabit Ethernet channels support Dual Gigabit Ethernet (1000Base-T), Fast Ethernet (100Base-Tx) and

Ethernet (10Base-T)



Triple speed 1000Mbps (1000Base-T), 100 Mbps (100Base-Tx) and 10 Mbps (100Base-T) operation



Nway auto negotiation automatic sensing and switching between 1Gbps full duplex and 100 / 10 Mbps operations Simplex or

Full Duplex



RJ-45 female connectors

Technical Specifications

Bypass Specifications

Silicom WDT Interval

(Software Programmable):

3,276,800 mSec (3,276.8 Sec): Maximum

100 mSec ( 0.1 Sec) : Minimum

WDT Interval = (2^wdt_interval_parameter)*(0.1) sec.

wdt_interval_parameter: { Valid Range: 0-15}

Copper Gigabit Ethernet Technical Specifications

– (1000Base-T) Adapters:

IEEE Standard / Network

topology:

IEEE802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3az

Gigabit Ethernet, 1000Base-T

Fast Ethernet, 100Base-TX

Ethernet, 10Base-T

Full duplex / Simplex:

Support both Simplex & Full duplex operation in all operating speeds