전자부품 데이터시트 검색엔진
  Korean  ▼
ALLDATASHEET.CO.KR

X  

MAX5457EEE 데이터시트(PDF) 2 Page - Maxim Integrated Products

부품명 MAX5457EEE
상세설명  Stereo Audio Taper Potentiometers with Pushbutton Interface
PDF  20 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
제조업체  MAXIM [Maxim Integrated Products]
홈페이지  https://www.maximintegrated.com/en.html
Logo MAXIM - Maxim Integrated Products

MAX5457EEE 데이터시트(HTML) 2 Page - Maxim Integrated Products

  MAX5457EEE Datasheet HTML 1Page - Maxim Integrated Products MAX5457EEE Datasheet HTML 2Page - Maxim Integrated Products MAX5457EEE Datasheet HTML 3Page - Maxim Integrated Products MAX5457EEE Datasheet HTML 4Page - Maxim Integrated Products MAX5457EEE Datasheet HTML 5Page - Maxim Integrated Products MAX5457EEE Datasheet HTML 6Page - Maxim Integrated Products MAX5457EEE Datasheet HTML 7Page - Maxim Integrated Products MAX5457EEE Datasheet HTML 8Page - Maxim Integrated Products MAX5457EEE Datasheet HTML 9Page - Maxim Integrated Products Next Button
Zoom Inzoom in Zoom Outzoom out
 2 / 20 page
background image
Stereo Audio Taper Potentiometers
with Pushbutton Interface
2
_______________________________________________________________________________________
ABSOLUTE MAXIMUM RATINGS
ELECTRICAL CHARACTERISTICS
(VDD = VLOGIC = +2.7V to +5.5V, VSS = 0V, GND = 0V, VH_ = VDD, VL_ = VSS, TA = TMIN to TMAX. Typical values are at TA = +25°C,
unless otherwise specified.) (Note 1)
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
(MAX5456) SHDN, MUTE, VOLUP, VOLDN,
BAL_ to GND.....................................-0.3V to (VLOGIC + 0.3V)
(MAX5457) SHDN, MUTE, UP/BAL1, DN/BAL0, MODE,
MODE_IND to GND...........................-0.3V to (VLOGIC + 0.3V)
H_, L_, and W_ to VSS ..............................-0.3V to (VDD + 0.3 V)
VDD to GND ..............................................................-0.3V to +6V
VDD to VSS ................................................................-0.3V to +6V
VLOGIC to GND.........................................................-0.3V to +6V
VLOGIC to VSS...........................................................-0.3V to +6V
VSS to GND............................................................-3.0V to +0.3V
Peak Current into H_, L_, and W_.......................................±1mA
Average Current into H_, L_, and W_ ..............................±500µA
Input and Output Latchup Immunity...............................±200mA
Continuous Power Dissipation (TA = +70°C)
16-Pin QSOP (derate 8.3mW/°C above +70°C)........666.7mW
16-Pin TQFN (derate 16.9mW/°C above +70°C) ....1349.1mW
Operating Temperature Range ...........................-40°C to +85°C
Junction Temperature ......................................................+150°C
Storage Temperature Range .............................-60°C to +150°C
Lead Temperature (soldering, 10s) .................................+300°C
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
UNITS
End-to-End Resistance
R
Figures 1, 2
7
10
13
k
Ω
Maximum Bandwidth
fCUTOFF
From H_ to W_, CLOAD = 10pF
100
kHz
Absolute Ratio Tolerance
No load at the output of the wiper, W_ = -6dB
±0.25
dB
Tap-to-Tap Tolerance
±0.1
dB
VDD = 5V, VH_ = (VDD / 2) + 1VRMS,
f = 1kHz, tap = -6dB, VL_ = VDD / 2, RL =
∞
0.01
Total Harmonic Distortion Plus
Noise
THD+N
VDD = 3V, VSS = 0V, VL_ = 1.5V,
VH_ = 1.5V + 1VRMS, f = 1kHz, RL = 10k
Ω to
(VDD / 2), CL = 5pF, tap = -6dB
0.23
%
Channel-to-Channel Isolation
-100
dB
Interchannel Matching
f = 20Hz to 20kHz, tap = -6dB
±0.5
dB
Mute Attenuation
-90
dB
Power-Supply Rejection Ratio
PSRR
-80
dB
Wiper Resistance
RW
1000
1700
Ω
Wiper Capacitance
CW
10
pF
H Terminal Capacitance
CH
5pF
L Terminal Capacitance
CL
7pF
End-to-End Resistance
Temperature Coefficient
50
ppm/°C
Ratiometric Resistance
Temperature Coefficient
5
ppm/°C
Output Noise
en
20Hz to 20kHz
0.95
µVRMS
PUSHBUTTON CONTACT INPUTS (
UP/BAL1, DN/BAL0, MUTE, VOLUP, VOLDN, BAL0, BAL1, MODE)
Internal Pullup Resistor
RPULLUP
32
50
65
k
Ω
Single Pulse-Width Input
tlPW
Figure 5
22.5
ms
Repetitive Input Pulse High Time
tHPW
Figure 5
40
ms
Timeout Period
tWS
Click/pop suppression inactive
32
ms



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20


데이터시트 다운로드

Go To PDF Page


링크 URL



ALLDATASHEET 가 귀하에 도움이 되셨나요?  [ DONATE ] 

Alldatasheet는?   |   광고문의   |   운영자에게 연락하기   |   개인정보취급방침   |   링크 투 데이터시트    |   링크교환   |   제조사별 검색
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com