Application Ideas

resistant protection for touch

screens, liquid crystal and flat

panel displays, mobile electronic

handhelds, electronic tablets and

other electronic components

and devices

– an anti-stiction coating for liquid crystal displays, micromotors or

MEMS (Micro Electronic Mechanical Systems) components

– an anti-migration coating for displays, spindle motors or lubricated

electronic parts or

– an anti-corrosion coating for a variety of materials and components

Application Techniques

Can be dipped, sprayed or selectively deposited. Water should be kept out of coating bath as contact will decrease

the pot life. Surfaces to be coated should be clean and dried before application. The solvent will evaporate quickly

and the fluoropolymer film will dry in minutes. The coating should be thermally cured in an oven for best results.

Application Options

Dipping (preferred), spray or syringe dispense

Drying/Curing

Dries at room temperature; can be handled in under two minutes;

thermally cure at 135°C for 10-15 minutes

Removability

Permanent once cured

Safety, Handling, Storage, Shelf Life

To avoid thermal decomposition, neither the coating solution nor the dried fluoropolymer film should be

subjected to temperatures above 250°C (482°F). When stored under conditions of 16-27°C (60-80°F) and less

than 60% R.H. in the original, unopened container, the shelf life is certified for two years. Before using this

product, please read the current product Material Safety Data Sheet (available through your 3M sales or technical

service representative or at www.3M.com/Novec) and the precautionary statement on the product package.

Follow all applicable precautions and directions.

For Additional Information

To request additional product information or sales assistance, contact 3M Customer Service at one of the numbers

below or visit www.3M.com/Novec. For other 3M global offices or information on other 3M products for

electronics, visit our web site at 3M.com/electronics.

Please recycle. Printed in USA.

© 3M 2014. All rights reserved.

Issued: 3/14 9784HB

60-5002-0519-4

3M and Novec are trademarks of 3M Company.

Used under license by 3M subsidiaries and affiliates.

Electronics Markets Materials Division

3M Center, Building 224-3N-11

St. Paul, MN 55144-1000

www.3M.com/novec

1-800-810-8513

3

Product Use: All statements, technical information and recommendations contained in this document are based on tests or experience that 3M believes are reliable. However,

many factors beyond 3M’s control can affect the use and performance of a 3M product in a particular application, including conditions under which the product is used and the

time and environmental conditions in which the product is expected to perform. Since these factors are uniquely within the user’s knowledge and control, it is essential that the

user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for the user’s method of application.

Warranty and Limited Remedy: Unless stated otherwise in 3M’s product literature, packaging inserts or product packaging for individual products, 3M warrants that each

3M product meets the applicable specifications at the time 3M ships the product. Individual products may have additional or different warranties as stated on product literature,

package inserts or product packages. 3M MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. User

is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user’s application. If the 3M product is defective within the warranty period,

your exclusive remedy and 3M’s and seller’s sole obligation will be, at 3M’s option, to replace the product or refund the purchase price.

Limitation of Liability: Except where prohibited by law, 3M and seller will not be liable for any loss or damage arising from the 3M product, whether direct, indirect, special,

incidental, or consequential regardless of the legal theory asserted, including warranty, contract, negligence or strict liability.

The Novec brand is the hallmark for a variety of proprietary 3M products. Although each has its own unique formula and performance properties, all

Novec products are designed in common to address the need for safe, effective, sustainable solutions in industry-specific applications. These include

precision and electronics cleaning, heat transfer, fire protection, lubricant deposition and several specialty chemical applications.

Brand Family

United States

3M Electronics Markets

Materials Division

800 810 8513

China

3M China Ltd.

86 21 6275 3535

Europe

3M Belgium N.V.

32 3 250 7521

Japan

Sumitomo 3M Limited

813 3709 8250

Korea

3M Korea Limited

82 2 3771 4114

Singapore

3M Singapore Pte. Ltd.

65 64508888

Taiwan

3M Taiwan Ltd.

866 2 2704 9011