PIC24FJ128GL303 datasheet(53/424 Pages) MICROCHIP

53 / 424 page

 2019-2020 Microchip Technology Inc.

DS30010198B-page 53

PIC24FJ128GL306 FAMILY

5.0

DIRECT MEMORY ACCESS

CONTROLLER (DMA)

The Direct Memory Access (DMA) Controller is designed

to service high throughput data peripherals operating on

the SFR bus, allowing them to access data memory

directly and alleviating the need for CPU-intensive man-

agement. By allowing these data-intensive peripherals to

share their own data path, the main data bus is also

deloaded, resulting in additional power savings.

The DMA Controller functions both as a peripheral and a

direct extension of the CPU. It is located on the micro-

controller data bus, between the CPU and DMA-enabled

peripherals, with direct access to SRAM. This partitions

the SFR bus into two buses, allowing the DMA Controller

access to the DMA-capable peripherals located on the

new DMA SFR bus. The controller serves as a Master

device on the DMA SFR bus, controlling data flow from

DMA-capable peripherals.

The controller also monitors CPU instruction process-

ing directly, allowing it to be aware of when the CPU

requires access to peripherals on the DMA bus and

automatically relinquishing control to the CPU as

needed. This increases the effective bandwidth for

handling data without DMA operations causing a

processor Stall. This makes the controller essentially

transparent to the user.

The DMA Controller has these features:

• Six Independent and Independently

Programmable Channels

• Concurrent Operation with the CPU (no DMA

caused Wait states)

• DMA Bus Arbitration

• Five Programmable Address modes

• Four Programmable Transfer modes

• Four Flexible Internal Data Transfer modes

• Byte or Word Support for Data Transfer

• 16-Bit Source and Destination Address Register

for Each Channel, Dynamically Updated and

Reloadable

• 16-Bit Transaction Count Register, Dynamically

Updated and Reloadable

• Upper and Lower Address Limit Registers

• Counter Half-Full Level Interrupt

• Software Triggered Transfer

• Null Write mode for Symmetric Buffer Operations

A simplified block diagram of the DMA Controller is

shown in Figure 5-1.

FIGURE 5-1:

DMA FUNCTIONAL BLOCK DIAGRAM

Note:

This data sheet summarizes the features of

the PIC24FJ128GL306 family of devices. It

is not intended to be a comprehensive

reference source. To complement the infor-

mation in this data sheet, refer to “Direct

Memory Access Controller (DMA)”

(www.microchip.com/DS30009742) in the

“dsPIC33/PIC24 Family Reference Man-

ual”. The information in this data sheet

supersedes the information in the FRM.

To I/O Ports

To DMA-Enabled

Peripherals

and Peripherals

DMACH0

DMAINT0

DMASRC0

DMADST0

DMACNT0

DMACH1

DMAINT1

DMASRC1

DMADST1

DMACNT1

DMACH4

DMAINT4

DMASRC4

DMADST4

DMACNT4

DMACH5

DMAINT5

DMASRC5

DMADST5

DMACNT5

DMACON

DMAH

DMAL

DMABUF

Channel 0

Channel 1

Channel 4

Channel 5

Data RAM

Address Generation

Data RAM

Control

Logic

Data

Bus

CPU Execution Monitoring

PIC24FJ128GL303 데이터시트(PDF) 53 Page - Microchip Technology

PIC24FJ128GL303 데이터시트(HTML) 53 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL