8.2.1.3 Application Curve

The interaction between the output stage of an operational amplifier (op amp) and capacitive loads can impact

the stability of the circuit. Throughout the industry, op-amp output-stage requirements have changed greatly

since their original creation. Classic output stages with the class-AB, common-emitter, bipolar-junction transistor

(BJT) have now been replaced with common-collector BJT and common-drain, complementary metal-oxide

semiconductor (CMOS) devices. Both of these technologies enable rail-to-rail output voltages for single-supply

and battery-powered applications. A result of changing these output-stage structures is that the op-amp open-

frequency, and also the resulting closed-loop output impedance over frequency, is crucial for the understanding

of loop-gain, bandwidth, and stability analysis. Figure 8-4 shows how the INA592 closed-loop output impedance

varies over frequency.

Frequency (Hz)

0.0001

0.001

0.01

0.1

1

10

100

1000

1

10

100

1k

10k

100k

1M

10M

G = 2

G = 0.5

Figure 8-4. Closed-Loop Output Impedance vs Frequency

www.ti.com

INA592

SBOS914E – OCTOBER 2018 – REVISED FEBRUARY 2021

Copyright © 2021 Texas Instruments Incorporated

Submit Document Feedback

27

Product Folder Links: INA592