ADIS16446

Data Sheet

Rev. 0 | Page 6 of 23

ABSOLUTE MAXIMUM RATINGS

Table 3.

Parameter

Rating

Mechanical Shock Survivability

Any Axis, Unpowered, 0.5 ms, ½ Sine

2000 g

Any Axis, Powered, 0.5 ms, ½ Sine

2000 g

VDD to GND

−0.3 V to +3.45 V

Digital Input Voltage to GND

−0.3 V to VDD + 0.3 V

Digital Output Voltage to GND

−0.3 V to VDD + 0.3 V

Temperature

Operating Range

−40°C to +105°C

−65°C to +125°C

1

Extended exposure to temperatures outside the specified temperature

range of −40°C to +105°C can adversely affect the accuracy of factory

calibration. For best accuracy, store the device within the specified

operating range of −40°C to +105°C.

2

Although the device is capable of withstanding short-term exposure to

150°C, long-term exposure threatens internal mechanical integrity.

Stresses at or above those listed under Absolute Maximum

Ratings may cause permanent damage to the product. This is a

stress rating only; functional operation of the product at these

or any other conditions above those indicated in the operational

section of this specification is not implied. Operation beyond

the maximum operating conditions for extended periods may

affect product reliability.

THERMAL RESISTANCE

Thermal performance is directly linked to printed circuit board

(PCB) design and operating environment. Careful attention to

PCB thermal design is required.

junction to case thermal resistance.

Table 4. Thermal Resistance

Package Type

Mass (grams)

20-Lead ML-20-3

36.5

16.9

15

ESD CAUTION