Specifications are subject to change without notice WM30 96 DS 071020

7

WM30 96

Protocol

Profibus DP V0 slave

Baudrate

9.6 k to 12 Mbps (9.6,

19.2, 45.45, 93.75, 187.5,

or 500 kbps; 1.5, 3, 6, or

12 Mbps)

Address

2-125 (default 126)

Note

With the rotary switch

(on the back of the basic

unit) in lock position

the modification of the

programming parameters

and the reset command

by means of the serial

communication is not

allowed. In this case just

the data reading is allowed.

Insulation

See “Insulation between

inputs and outputs” table

Approval

PROFIBUS

Nutzerorganisation e.V.

Output specifications (cont.)

Min. -9,999,999,999 kWh/

kvarh

Max. 9,999,999,999 kWh/

kvarh.

Type

Total energy meters

+kWh, +kvarh, -kWh,

-kvarh

Partial energy meters

+kWh, +kvarh, -kWh,

-kvarh

Meters

Total

4 (8+2, 9+1, 10 digit)

Partial

4 (8+2, 9+1, 10 digit)

Pulse output

Connectable to total and/or

partial meters

Energy meter recording

Storage of total and partial

energy meters.

Energy meter storage

format (EEPROM)

Energy meters

The same for the other

phases: L2, L3.

System

The harmonic distortion

can be measured in 3-wire

or 4-wire systems.

Tw: 0.02 sec@50Hz

without filter

Analysis principle

FFT

Harmonic measurement

Current

Up to the 32nd harmonic

Voltage

Up to the 32nd harmonic

Type of harmonics

THD (VL1 and VL1-N)

The same for the other

phases: L2, L3.

THD (AL1)

Harmonic distortion analysis