Updated: 2014-01-16

© SignalQuest, LLC

2014

10 Water St.

Lebanon, NH 03766 USA

Tel: 603.448.6266

Fax 603.218.6426

www.signalquest.com

info@signalquest.com

13

SQ-RIL

Low range

SQ-RIW

Wide range

-12R

5 – 15 V supply

-36R

7 – 36 V supply

Standard version (stock)

-1C

1 Deutsch, 12 pin

SQ-ENCL-8

IP67

Tap bus (internal

CAN terminator)

-1CA

1 Deutsch, 12 pin, black

anodized

SQ-ENCL-8

IP67

Tap bus (internal

CAN terminator)

-2C

2 Deutsch, 12 pin

SQ-ENCL-7

IP67

In-line bus

-2CA

2Deutsch, 12 pin, black

anodized

SQ-ENCL-7

IP67

In-line bus

-3C

Flying lead

SQ-ENCL-3

IP65

Tap bus (internal

CAN terminator)

-4C

1 circular connector

SQ-ENCL-9

IP68

Tap bus (internal

CAN terminator)

-5C

2 circular connectors

SQ-ENCL-10

IP68

In-line bus

-7C

1 connector, low cost

SQ-ENCL-11

IP67

Tap bus (internal

CAN terminator)

-8C

2 connector, low cost

SQ-ENCL-11

IP67

In-line bus

-P1

Standard performance

Standard accuracy and resolution

-P2

High performance

Higher accuracy and resolution

-S

500 mS settling time

Better noise rejection, slower response time –

This model uses a 0.5 second moving average filter to provide digital

damping. This reduces the impact that spurious accelerations and

vibrations have on the angle reading. This model will reject noise

better than the “F” model, but with the tradeoff of a slower response

time.

-F

100 mS settling time

Faster response time, poorer noise rejection –

This model uses a 0.1 second moving average filter to provide digital

damping. This model will respond more quickly to changes in angle

than the “S” model, but with the trade off of poorer noise rejection.

ID0

ID0 (Address 0xA2)

ID1

ID1 (Address 0xA3)

ID2

ID2 (Address 0xA4)

ID3

ID3 (Address 0xA5)

IDX

Hardware Addressable

IDS

Software Addressable

Coming soon