SQ-SEN-200

Updated: 2014-01-16

© SignalQuest, LLC.

2013

10 Water St.

Lebanon, NH 03766 USA

Tel: 603.448.6266

Fax 603.218.6426

www.signalquest.com

info@signalquest.com

10

-NR

No onboard regulator

Special order only

-3.0R

3.0 V onboard regulator

Special order only

-3.3R

3.3 V onboard regulator

Standard version (stock)

-HMP

Horizontal mount package

Fits into standard 0.100” grid circuit board

-VMP

Vertical mount package

Available for SQ-SI family only

-NP

No pins installed

Fits inside potting box enclosures (SQ-ENCL-1)

-HP

High performance

Better if power consumption is not a primary concern

-LP

Low power

Better if low power consumption is critical

-IND

High accuracy

Suitable for industrial applications needing precise

measurement

-LC

Low cost

Suitable for high volume, lower accuracy, cost sensitive

applications

-S

500 mS settling time

Better noise rejection, slower response time –

This model uses a 0.5 second moving average filter to

provide digital damping. This reduces the impact that

spurious accelerations and vibrations have on the angle

reading. This model will reject noise better than the “F”

model, but with the tradeoff of a slower response time.

-F

100 mS settling time

Faster response time, poorer noise rejection –

This model uses a 0.1 seconds second moving average filter

to provide digital damping. This model will respond more

quickly to changes in angle than the “S” model, but with the

tradeoff of poorer noise rejection.

-XTRIG1

Specify angle and axis

High impedance

output i.e. low drive

current

X20 means trigger will trip when X

Tilt is >= 20 degrees from horizontal

in either direction.

Y10 means trigger will trip when Y

Tilt is >= 10 degrees from horizontal

in either direction.

-YTRIG2

Specify angle and axis

-XTRIG3

Specify angle and axis

Low impedance

output i.e. high drive

current.

-YTRIG4

Specify angle and axis

-HYST

Specify hysteresis angle

H2 means hysteresis of 2 degrees i.e. triggers trips at TRIG

angle, but un-trips at (TRIG – 2 degrees).