MODEL: M2XPA3

M2XPA3 SPECIFICATIONS

ES-5104 Rev.14 Page 2/6

http://www.m-system.co.jp/

[4] POWER INPUT

AC Power

M2: 100 – 240 V AC (Operational voltage range 85 – 264 V,

47 – 66 Hz)

(90 – 264 V for UL)

DC Power

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

P: 110 V DC

(Operational voltage range 85 – 150 V, ripple 10 %p-p max.)

(110 V ±10 % for UL)

[5] OPTIONS (multiple selections)

Standards & Approvals (must be specified)

/N: Without CE or UL

/CE: CE marking

/UL: UL approval, CE marking

Other Options

blank: none

/Q: Option other than the above (specify the specification)

SPECIFICATIONS OF OPTION: Q (multiple selections)

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

/C03: Rubber coating (UL not available)

TERMINAL SCREW MATERIAL

/S01: Stainless steel (UL not available)

RELATED PRODUCTS

• PC configurator software (model: JXCON)

Downloadable at M-System’s web site.

A dedicated cable is required to connect the module to the

PC. Please refer to the internet software download site or

the users manual for the PC configurator for applicable

cable types.

GENERAL SPECIFICATIONS

Construction: Plug-in

Connection: M3 screw terminals (torque 0.8 N·m)

Screw terminal: Chromated steel (standard) or stainless

steel

Housing material: Flame-resistant resin (black)

Isolation: Input to output to power

Overrange output: Approx. -15 to +115 % at 1 – 5 V

Zero adjustment: -5 to +5 % (front)

Span adjustment: 95 to 105 % (front)

Configuration: Via PC Configurator Software (model: JXCON)

on the Windows PC connected to the front jack.

Programmable features include:

· I/O type and range

· Detecting level

· Sensor excitation

· Zero and span adjustments

· Low-end cutout

· Linearization

· Sample number for the moving average

DIP switch settings:

• Input Type

• Pulse Sensing (Capacitor coupled, DC coupled)

• Noise Filter (High, Low, None)

Status indicator LED: Blinking patterns indicate different

operating status of the transmitter.

Excitation adjustment: 4 V, 8 V or 12 V DC

Configurator connection: 2.5 dia. miniature jack;

RS-232-C level

Low-end cutout: 0 – 115 % programmable;

No cutout with 0 % setting; hysteresis fixed at 1 % (factory

set to: No cutout)