2

－

－

－

The Name You Can Trust!

■ MATERIAL CHARACTERISTICS

L material: Standard type .For signal line application in which the blocking region is

near100MHz. Impedance values selected for effectiveness at 10 to 300MHz.

H material: For applications calling for low insertion loss at low frequencies and sharply

Increasing impedance at high frequency. Designed for high impedance at

highfrequency for high speed signal line applications.

K material: High frequency range type intended for the 100MHz region and above. For

signal line applications in which the signal frequency is far from the cutoff

frequency. Impedance values selected for effectiveness at 40 to 400MHz.

G material: Designed as a noise countermeasure for the 200MHz~1GHz range where the

rise of the Zcomponent is in the high frequency area.

Effective Range of Noise Suppression

1MHz

10MHz

100MHz

1GHz

Application

EFZ-L

General Signal Line (I/O Port)

EFZ-H

High Speed Signal Line (LCD panel,

Clock Signal, RAM Bus)

EFZ-K

General Signal Line (I/O Port)

Frequency higher than L material

EFZ-G

Ultra High Speed Signal Line

(>100MHz)