www.ti.com

ABSOLUTE MAXIMUM RATINGS

TPS730xx

SBVS054E – NOVEMBER 2004 – REVISED AUGUST 2005

This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated

circuits be handled with appropriate precautions. Failure to observe proper handling and installation

procedures can cause damage.

ESD damage can range from subtle performance degradation to complete device failure. Precision

integrated circuits may be more susceptible to damage because very small parametric changes could

cause the device not to meet its published specifications.

PRODUCT

TPS730xxyyyz

XX is nominal output voltage (for example, 28 = 2.8V, 01 = Adjustable).

YYY is package designator.

Z is package quantity.

(1)

For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI

website at www.ti.com.

(2)

Output voltages from 1.2V to 4.5V in 50mV increments are available through the use of innovative factory EEPROM programming;

minimum order quantities may apply. Contact factory for details and availability.

UNIT

-0.3 V to 6 V

-0.3 V to 6 V

Peak output current

Internally limited

ESD rating, HBM

2 kV

ESD rating, CDM

500 V

Continuous total power dissipation

See Dissipation Ratings Table

Junction temperature range

-40°C to 150°C

-65°C to 150°C

(1)

Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings

only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating

conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

2