Zhengzhou Winsen Electronics Technology Co., Ltd

www.winsen-sensor.com

Tel: 86-371-67169097/67169670 Fax: 86-371-60932988

Email: sales@winsensor.com

Leading gas sensing solutions supplier in China!

6. The module cannot be completely encapsulated with resin material, and it cannot be immersed in an

oxygen-free environment, otherwise the performance of the sensor will be damaged.

7. The module cannot be used in the environment containing corrosive gas for a long time. Corrosive gas will

damage the sensor.

8. The module needs to be warmed up for more than 3 minutes when it is powered on for the first time.

9. Do not use this module in systems involving personal safety.

10. Do not install the module in a strong convection air environment.

11. Do not place the module in high-concentration organic gas for a long time. Long-term placement will cause

the sensor zero point drift and slow recovery.

12. It is prohibited to use hot-melt adhesive or sealant to seal the module with a curing temperature higher than

80℃.

13. The sensor should be away from the heat source, and avoid direct sunlight or other heat radiation.

Zhengzhou Winsen Electronics Technology Co., Ltd

Add.: NO.299 Jin Suo Road, National Hi-Tech Zone,

Zhengzhou, 450001 China

Tel.: 0086-371-67169097 67169670

Fax: +86- 371-60932988

E-mail: sales@winsensor.com

Website: www.winsen-sensor.com