MODEL: 6DV-B

6DV-B SPECIFICATIONS

ES-4220 Rev.20 Page 3/8

http://www.m-system.co.jp/

Ex ia EN 60079-11 (for ATEX intrinsic safety)

Ex d EN 60079-1 (for ATEX flameproof)

EMC Directive

EMI EN 61000-6-4

EMS EN 61000-6-2

RoHS Directive

Safety approval:

FM: Intrinsically safe (US, Canada)

Class I, Div. 1, Groups A, B, C and D

Class II, Div. 1, Groups E, F and G

Class III, Div. 1

Class I, Zone 0, AEx ia IIC (US)

Class I, Zone 0, Ex ia IIC (Canada)

T4 and T5

(Class 3600)

(Class 3610)

(ANSI/ISA 60079-0)

(ANSI/ISA 60079-11)

(CAN/CSA-C22.2 E60079-0)

(CAN/CSA-C22.2 E60079-11)

FM: Explosion-proof and Dust-ignition proof (US)

Class I, Div. 1, Groups B, C and D

Class II, Div. 1, Groups E, F and G

Class III, Div. 1

T6

(Class 3600)

(Class 3615)

TIIS: Intrinsic safety

Ex ia IIC T5

TIIS: Flameproof

Ex d IIC T6

(EN 60079-0)

(EN 60079-11)

II 1G, Ex ia IIC; T4, T5, Ga

ATEX: Intrinsic safety

ATEX: FIameproof

II 2G, Ex db IIC; T5, T6 Gb

(EN 60079-0)

(EN 60079-1)

SAFETY PARAMETERS

Operating temperature

For FM/ATEX Intrinsically safe

(Temp Class: Operating temperature)

T4: -40 to +80°C

T5: -40 to +60°C

FM Explosion-proof

T6: -40 to +80°C

ATEX Flameproof

T5: -40 to +80°C

T6: -40 to +70°C

For TIIS Intrinsically safe

T5 -20 to +60°C

For TIIS Flameproof

T6 -20 to +60°C

Ex-data:

Ui (Vmax): 30 V DC

Ii (Imax): 100 mA DC

Pi (Pmax): 0.75 W

Ci: 1.0 nF

Li: 0 mH (TIIS Intrinsically Safe: ‘Negligible value’)

DISPLAY DESCRIPTIONS

■ DISPLAY DIGITS

The decimal point position may shift according to the

required number of digits for the integer section, even when

more than one decimal places have been specified.

However, when the number of decimal places is set to 3,

the ‘0’ in the integer section is not shown in order to secure

the number of effective digits, as explained in the table

below.

The ‘0’ is displayed when the number of decimal places is

set to 2, though the number of effective digits in this case is

reduced by 1 digit compared from the 3 decimal places.

Select appropriately for the application. Refer to

‘Programming Procedure’ for how to choose decimal point

positions.

3

DATA DISPLAY

DECIMAL

VALUE

2

-1.000 thr . -1.999

-0.001 thr . -0.999

-1.00 thr . -1.99

-0.01 thr . -0.99

...

...

...

...

Over-scale

DATA DISPLAY

ERROR TYPE

Under-scale

Setting error

Security code error

■ ERROR INDICATION

The data display blinks when an abnormality is detected.

The unit display backlight also blinks.

When the setting error or the security code error occurs, press

ENTR / ESC button once to cancel the error status and proceed

to set again.