MODEL: BVS

BVS SPECIFICATIONS

ES-3118 Rev.11 Page 1/3

https://www.m-system.co.jp/

Space-saving Two-wire Signal Conditioners B-UNIT

SIGNAL TRANSMITTER

(isolated)

Functions & Features

• Converts a DC input into a standard 4 – 20 mA DC signal

• Monitor terminals

• High-density mounting

26 (1.02)

93

(3.66)

mm (inch)

137

(5.39)

MODEL: BVS–[1][2]

ORDERING INFORMATION

• Code number: BVS-[1][2]

Specify a code from below for each of [1] and [2].

(e.g. BVS-6/CE/Q)

• Special input range (For codes Z & 0)

• Specify the specification for option code /Q

(e.g. /C01/S01)

[1] INPUT

Current

A: 4 – 20 mA DC (Input resistance 250 Ω)

B: 2 – 10 mA DC (Input resistance 500 Ω)

C: 1 – 5 mA DC (Input resistance 1000 Ω)

D: 0 – 20 mA DC (Input resistance 50 Ω)

E: 0 – 16 mA DC (Input resistance 62.5 Ω)

F: 0 – 10 mA DC (Input resistance 100 Ω)

G: 0 – 1 mA DC (Input resistance 1000 Ω)

H: 10 – 50 mA DC (Input resistance 100 Ω)

Z: Specify current (See INPUT SPECIFICATIONS)

(0 % or 50 % input must be equal to 0 mA.)

Voltage

1: 0 – 10 mV DC (Input resistance 20 kΩ min.)

2: 0 – 100 mV DC (Input resistance 100 kΩ min.)

3: 0 – 1 V DC (Input resistance 1 MΩ min.)

4: 0 – 10 V DC(Input resistance 2 MΩ min.)

5: 0 – 5 V DC (Input resistance 1 MΩ min.)

6: 1 – 5 V DC (Input resistance 1 MΩ min.)

0: Specify voltage (0 % or 50 % input must be equal to 0 V.)

[2] OPTIONS (multiple selections)

Standards & Approvals

blank: Without CE

/CE: CE marking

Other Options

blank: none

/Q: Option other than the above (specify the specification)

SPECIFICATIONS OF OPTION: Q (multiple selections)

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

/C03: Rubber coating

TERMINAL SCREW MATERIAL

/S01: Stainless steel

GENERAL SPECIFICATIONS

Construction: Plug-in

Connection: M3.5 screw terminals (torque 0.8 N·m)

Screw terminal: Nickel-plated steel (standard) or stainless

steel

Housing material: Flame-resistant resin (black)

Isolation: Input to output

Zero adjustment: -5 to +5 % (front)

Span adjustment: 95 to 105 % (front)

INPUT SPECIFICATIONS

■ DC Current:

Shunt resistor attached to the input terminals (0.5 W)

Specify input resistance value for code Z.

■ DC Voltage: -300 – +300 V DC (-30 – +30 V for CE)

Minimum span: 10 mV (max. 30 V for CE)

Input resistance

(Span) 10 – 100 mV : 20 k (Ω minimum)

0.1 – 1 V : 100 k

1 – 10 V : 1 M

≥ 10 V : 2 M