VITESSE

SEMICONDUCTOR CORPORATION

Datasheet

VSC834

2.5Gb/s 17x17 Crosspoint Switch

with Input Signal Activity (ISA) Monitoring

G52247-0, Rev 4.2

Page 1

02/09/01

© VITESSE SEMICONDUCTOR CORPORATION • 741 Calle Plano • Camarillo, CA 93012

Tel: (800) VITESSE • FAX: (805) 987-5896 • Email: prodinfo@vitesse.com

Internet: www.vitesse.com

Features

General Description

The VSC834 is a monolithic 17x17 asynchronous crosspoint switch designed to carry broadband data

streams at up to 2.5Gb/s. The non-blocking switch core is programmed through a parallel microprocessor inter-

face that allows random access programming of each output port. A high degree of signal integrity is main-

tained through the chip through fully differential signal paths.

The crosspoint function is based on a multiplexer tree architecture. Each data output is driven by a 17:1

multiplexer tree that can be programmed to one and only one of its 17 inputs, and each data input can be pro-

grammed to multiple outputs. The signal path is unregistered, so no clock is required for the data inputs. The

signal path is asynchronous, so there are no restrictions on the phase, frequency, or signal pattern at each input.

Each input channel has an activity monitor function that can be used to identify loss of activity (LOA). An inter-

rupt pin is provided to signal LOA, after which an external controller can query the chip to determine the chan-

nel(s) on which the fault occurred.

Each output driver is a fully differential switched current driver with on-die back-terminations for maxi-

mum signal integrity. Data inputs are terminated on die through 50

Ω resistors connected to V

The parallel interface uses TTL levels, and provides address, data, and control pins that are compatible with

a microprocessor-style interface. The control port provides access to all chip functions, including LOA, and

programming. Program buffering is provided to allow multiple program assignments to be queued and issued

simultaneously via a single configure command.

VSC834 Block Diagram

• 17 Input by 17 Output Crosspoint Switch

• 2.5Gb/s NRZ Data Bandwidth

• 42 Gb/s Aggregate Bandwidth

• TTL Compatible

µP Interface

• Differential PECL Data Inputs

• On-chip 50

Ω Input Terminations

• 50

Ω Source Terminated PECL Output Drivers

• Single 3.3V Supply

• 9W Maximum Power Dissipation

• High Performance 256 Pin BGA Package

A0

A16

µP Interface

Y0

Y16

Control Logic