MODEL: R5-YV

R5-YV SPECIFICATIONS

ES-6122 Rev.7 Page 1/3

http://www.m-system.co.jp/

Remote I/O R5 Series

DC VOLTAGE OUTPUT MODULE

96.5

(3.80)

18 (.71)

90

(3.54)

mm (inch)

MODEL: R5-YV[1][2][3]

ORDERING INFORMATION

• Code number: R5-YV[1][2][3]

Specify a code from below for each [1] through [3].

(e.g. R5-YV2W/Q)

• Specify the specification for option code /Q

(e.g. /C01)

[1] NO. OF CHANNELS

1: 1

2: 2

[2] COMMUNICATION MODE

S: Single

W: Dual

[3] OPTIONS

blank: none

/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

/C03: Rubber coating

GENERAL SPECIFICATIONS

Connection

Internal bus: Via the Installation Base (model: R5-BS)

Output: Euro type connector terminal

stripped length 7 mm)

Internal power: Via the base (model: R5-BS)

Isolation: Output 1 to output 2 to internal bus or internal

power

Output range: Selectable with the side DIP SW

RUN indicator: Bi-color (red/green) LED;

Red when the bus A operates normally;

Green when the bus B operates normally;

Amber when both buses operate normally.

OUTPUT SPECIFICATIONS

■ Narrow Span: -1 – +1 V, 0 – 1 V DC

Load resistance: 10 kΩ min.

■ Wide Span: -10 – +10 V, -5 – +5 V, 0 – 10 V, 0 – 5 V, 1 – 5

V DC

Load resistance: 10 kΩ min.

■ Output Range

Except -10 to +10 V DC: -15 to +115 % of output range

-10 to +10 V DC: Approx. -11.5 to +11.5 V DC

INSTALLATION

Operating temperature: -10 to +55°C (14 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Atmosphere: No corrosive gas or heavy dust

Mounting: Installation Base (model: R5-BS)

Weight: 100 g (3.53 oz)

PERFORMANCE

Output range v.s. conversion accuracy

(Narrow span) -1 – +1 V DC : ±0.1 (%)

0 – 1 V DC : ±0.1

(Wide span) -10 – +10 V DC : ±0.05

-5 – +5 V DC : ±0.05

0 – 10 V DC : ±0.05

0 – 5 V DC : ±0.05

1 – 5 V DC : ±0.05

Data range: 0 – 10000 of the output range

Data allocation: 1 (2 for 2-channel type)

Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)

Response time: ≤ 0.2 sec. (0 – 90 %)

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 1500 V AC @ 1 minute

(output 1 to output 2 to internal bus or internal power)

2000 V AC @ 1 minute (power input to FG; isolated on the

power supply module)