MODEL: R3-BC32A

R3-BC32A SPECIFICATIONS

ES-8420 Rev.8 Page 2/5

https://www.m-system.co.jp/

INSTALLATION

Operating temperature: -10 to +55°C (14 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Atmosphere: No corrosive gas or heavy dust

Mounting: Installation Base (model: R3-BSx)

Weight: 150 g (0.33 lb)

PERFORMANCE

Data allocation: 4

Current consumption: 150 mA

Response time: ≤ 2 msec.

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 2000 V AC @ 1 minute

(Do 11 thru 28 to Do 31 thru 48 to Do 51 thru 68 to Do 71

thru 88 to internal bus or internal power)

2000 V AC @ 1 minute (power input to FG; isolated on the

power supply module)

STANDARDS & APPROVALS

EU conformity:

EMC Directive

EMI EN 61000-6-4

EMS EN 61000-6-2

RoHS Directive

FUNCTIONS

■OUTPUT HOLD or OUTPUT OFF

In normal conditions, the module outputs the signal from

the preferred bus A.

When an error is detected, the output is switched to the

data from the bus B.

• Output Hold

If both are in error, the module holds the signal and stands

by until one of the communications recovers.

• Output OFF

If both are in error, the module outputs OFF signals and

stands by until one of the communications recovers.

At the startup, it outputs OFF until the communication is

established and normal data is received.

■ STROBE SIGNAL CONTROL

Controls the timing of reading data. Strobe signal is output

at every data output. Strobe signal cannot be supplied

independently without data output.

Data

Output

Strobe

Signal

Output

Output

Time*

≥ Output

Time*

■ STROBE SIGNAL TIMING CHART

*Strobe signal output time is selectable with SW3.

OFF

ON