MODEL: R3-GSLMP1

R3-GSLMP1 SPECIFICATIONS

ES-8275 Rev.2 Page 5/10

https://www.m-system.co.jp/

· Device: Commands to read from/write in the device (Refer to the following table for available device types)

AVAILABLE DEVICE TYPES

AI / AO 32 bit

AI / AO 16 bit

DI / DO 32 bit

DI / DO 16 bit

SD: Special Register

SD: Special Register

SM: Special relay

SM: Special relay

D: Data Register

D: Data Register

X: Input

X: Input

W: Link Register

W: Link Register

Y: Output

Y: Output

TN: Timer, Current value

TN: Timer, Current value

M: Internal relay

M: Internal relay

STN: Retentive timer, Current value

STN: Retentive timer, Current value

L: Latch relay

L: Latch relay

CN: Counter, Current value

CN: Counter, Current value

F: Annunciator

F: Annunciator

SW, Link special Register

SW, Link special Register

V: Edge relay

V: Edge relay

Z: Index Register

Z: Index Register

B: Link relay

B: Link relay

R: File Register

R: File Register

----

S: STEP RELAY

ZR: File Register

ZR: File Register

TS: Timer, Contact

TS: Timer, Contact

RD: Module refresh Register

----

TC: Timer, Coil

TC: Timer, Coil

LTS: Long timer, Contact

----

LTC: Long timer, Coil

----

STS: Retentive timer, Contact

STS: Retentive timer, Contact

STC: Retentive timer, Coil

STC: Retentive timer, Coil

LSTS: Long retentive timer, Contact

----

LSTC: Long retentive timer, Coil

----

CS: Counter, Contact

CS: Counter, Contact

CC: Counter, Coil

CC: Counter, Coil

LCS: Long counter, Contact

LCS: Long counter, Contact

LCC: Long counter, Coil

LCC: Long counter, Coil

SB: Link special relay

SB: Link special relay

Max. 16 points of analog input/output and max. 16 points of digital input/output can be allocated per a virtual module. Set the data

allocation to 16 for the slot with the virtual analog input/output module, and set 1 for the slot with virtual digital input/output module by data

allocation mode of the R3 Interface module.

Note: Numbers of transmittable data is limited by number of channel and virtual module. R3-GSLMP1 can transmitted max. 128 channels

or 16 virtual modules. Even though the total number of channels is less than 128, if the total number of virtual modules is 16,

number of channel cannot be increased.

Do not mount any modules in the slots which are occupied by virtual modules. If a real I/O module is mounted in the slot, an internal

bus error occurs and the ERR LED turns on. Max. 16 real I/O modules and virtual modules are available. The R3 interface module

can not read the data for more than 16 modules.

Details are explained in “■ Number of the modules and the address allocation” on the next page.