MODEL: R5-NF1

R5-NF1 SPECIFICATIONS

ES-6134 Rev.4 Page 1/6

http://www.m-system.co.jp/

Remote I/O R5 Series

T-Link INTERFACE MODULE

(Fuji Electric T-Link use)

36.5 (1.44)

mm (inch)

100

(3.94)

90

(3.54)

3

2

3

2

MODEL: R5-NF1[1]

ORDERING INFORMATION

• Code number: R5-NF1[1]

Specify a code from below for [1].

(e.g. R5-NF1/Q)

• Specify the specification for option code /Q

(e.g. /C01)

[1] OPTIONS

blank: none

/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

/C03: Rubber coating

GENERAL SPECIFICATIONS

Connection

T-Link: Euro type connector terminal

stripped length 7 mm)

Internal bus: Via the Installation Base (model: R5-BS)

Internal Power: Via the base (model: R5-BS)

Isolation: T-Link to internal bus or internal power

RUN indicator: Bi-color (green/red) LED; green in normal

communications; red when receiving (Function selected

with DIP SW3)

ERR indicator: Bi-color (green/red) LED; the green ON/blinks

in communication errors; red when transmitting (Function

selected with DIP SW3)

Data allocation: Mode 1 or 2 set with the side DIP switch

DIP SW other functions

· I/O points

· Input or output or I/O mixed

Refer to the instruction manual for details.

T-Link SPECIFICATIONS

Station No. setting: Rotary switch; 00 – 99

Configuration: Multi-drop

Communication: Half-duplex

Baud rate: 500 kbps

Transmission media/distance:

INSTALLATION

Operating temperature: -10 to +55°C (14 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Atmosphere: No corrosive gas or heavy dust

Mounting: Installation Base (model: R5-BS)

Weight: 150 g (0.33 lb)

PERFORMANCE

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 500 V AC @ 1 minute (T-Link to internal

bus or internal power)