The MAX110 Control Panel screen displays the current

and average values for the MAX110’s two input chan-

nels, and offers convenient control of the configuration

settings. Pressing TAB selects a switch, and SPACE

BAR manipulates the switch. The “1” and “2” keys

enable and disable polling for inputs 1 and 2, respec-

tively. The input values may be displayed as raw ADC

counts or as real voltages. Data logging can be

enabled if the program is started with the log file com-

mand-line option. Table 6 lists the commands available

in the Control Panel screen.

The MAX110 Shutdown Power Cycling screen allows

evaluation of the shutdown mode. The “D” command

puts the MAX110 into its shutdown state, the “U” com-

mand brings the MAX110 out of shutdown, and the “P”

command makes the program alternate between the

shutdown and active states. Refer to the section

Activating Shutdown Mode.

MAX110 Evaluation System/Evaluation Kit

6

_______________________________________________________________________________________

KEY

FUNCTION

SPACE BAR

Select next serial port

ENTER

Use the selected serial port.

ALT+X

Exit the program.

KEY

FUNCTION

ALT+P

Return to Opening screen to select a different

COM port.

ALT+L

Begin downloading code to 80C32.

ALT+C

Start the Control Panel screen.

ALT+B

Display the baud-rate menu.

ALT+1

Use 1200 baud.

ALT+2

Use 2400 baud.

ALT+4

Use 4800 baud.

ALT+9

Use 9600 baud.

ALT+R

Send the cold-restart command to 80C32.

ALT+X

Exit the program.

KEY

FUNCTION

TAB

Highlight the next switch.

SHIFT+TAB

Highlight the previous switch.

SPACE BAR

Toggle the highlighted switch.

1

Enable or disable polling of input 1.

2

Enable or disable polling of input 2.

C

Display readings as raw ADC counts.

V

Display readings as real voltages.

L

Enable or disable data logging. This command

is available only if the MAX110 program was

started with the -L command-line option.

S

Enter the Shutdown Power Cycling screen.

B

Enter the Bit Manipulation Panel screen.

ALT+X

Exit the program.

Table 6. Control Panel Commands

Table 4. Opening Screen Commands

Table 5. Terminal Screen Commands

Table 3. Command-Line Options

OPTION

FUNCTION

?

Display program version and list of command-

line options.

-V

Specify the reference voltage ("-V2.5" means 2.5

volts).

-A

Specify the size of the rolling average queue

("-A10" means average the last 10 readings).

+O

Allow the bar graph to display overrange values

correctly.

-O

Do not compensate the bar-graph display for

overrange values. Values beyond ±VREF will

display incorrectly due to code aliasing.

1

Default to COM1.

2

Default to COM2.

3

Default to COM3.

4

Default to COM4.

-Lmyfile

Specify log file "myfile" to store control-panel

readings.

CONTINUE

Assume that the RAM resident program is

already loaded.