AT25QL321 datasheet(3/79 Pages) DIALOG

3 / 79 page

AT25QL321

DS-25QL321–131C–5/2017

Introduction

The Adesto® AT25QL321 is a serial interface Flash memory device designed for use in a wide variety of high-volume

consumer based applications in which program code is shadowed from Flash memory into embedded or external RAM

for execution. The flexible erase architecture of the AT25QL321 is ideal for data storage as well, eliminating the need for

additional data storage devices.

The erase block sizes of the AT25QL321 have been optimized to meet the needs of today's code and data storage

applications. By optimizing the size of the erase blocks, the memory space can be used much more efficiently. Because

certain code modules and data storage segments must reside by themselves in their own erase regions, the wasted and

unused memory space that occurs with large block erase Flash memory devices can be greatly reduced. This increased

memory space efficiency allows additional code routines and data storage segments to be added while still maintaining

the same overall device density.

SPI clock frequencies of up to 104MHz* are supported allowing equivalent clock rates of 266MHz for Dual Output and

532MHz for Quad Output when using the QPI and Fast Read Dual/Quad I/O instructions.The AT25QL321 array is

organized into 65,536 programmable pages of 256-bytes each. Up to 256 bytes can be programmed at a time using the

Page Program instructions. Pages can be erased 4KB Block, 32KB Block, 64KB Block or the entire chip.

The devices operate on a single 1.7V to 1.95V power supply with current consumption as low as 5mA active and 2µA for

Deep Power Down. All devices offered in space-saving packages. The device supports JEDEC standard manufacturer

and device identification with a 4K-bit Secured OTP.



AT25QL321 데이터시트(PDF) 3 Page - Dialog Semiconductor