Maxim Integrated │ 9

www.maximintegrated.com

USB2PMB2# Adapter Board

Evaluates: Munich (USB2PMB2#)

Santa Fe GUI Tab

This environment is similar to the Campbell tab described.

It consists of the internal block diagram of the Santa Fe

board and the following operations to perform:

● Selecting Channel/Range

● Sample Once and Sample Continuously

● Average

● Choose Sampling Rate and Sample Count

● View Plots

● Calibrate

● Plot Configurations Options

1)

Selecting Channel/Range: Refers to the block

diagram present at the right side of the GUI, which

describes four different channel input options.

Checking the right input and right input range at the

GUI translates the input channel and its data range

at the board. Each channel input has seven differ-

ent input range options for selection. See Figure 12.

2)

Sampling

a)

Sample Once: This pushbutton tab allows dis-

crete sampling.

b)

Sample Continuously: This feature allows

continuous sampling. Once the Sample

Continuously button is clicked the button

changes its text to

Stop Sampling and the

user would not be able to disconnect the board

from the software until the user clicks the

Stop

Sampling button.

c)

Sample Rate: This drop-down box option

allows the user to choose the sample rate or

the number of samples per second.

d)

Sample Count: This drop-down box option

allows the user to choose the number of sam-

ples to be sampled.

3)

Real Time Scope: The scope present on the left side

of the GUI represents the measured data with number

of samples in X-axis and Y-axis is selected from the

available plot view options from the bottom of the GUI

environment.

Figure 12. Munich/Santa Fe GUI